Electricians in Texas

A breaker that trips every evening in Dallas and a panel with no room left in El Paso raise the same two questions: who is legally allowed to do this work, and what should it cost? Electricians in Texas handle repairs, panel upgrades, new circuits and charger installs in homes across the state. This page sets out what the trade covers, prices the benchmark jobs we can build from checked sources, and teaches the two-part licence check that proves a company is legal to hire. Then choose your city.

Electrician working at an open residential breaker panel
  • Free quotes
  • No obligation
  • Licensed professionals
  • Texas-focused

What do electricians in Texas cost?

Electricians in Texas price most home work by the job, and the jobs differ too much for one honest average. Start with the benchmark we can show our working for: upgrading a Houston home to a 200-amp panel computes to $1,090–$1,470 installed, built from a named Square D load centre at a $269.00 retail price, the city's permit at $136.95, and 8–12 hours of labour. Three smaller jobs price the same way in the cost guide: a ceiling fan swap on an existing fan-rated box at $210–$305, one GFCI outlet replacement at $85–$130, and a whole-home surge protector fitted at the panel at $270–$320, that last one built on a manufacturer list price and labelled as such wherever it appears.

The labour in every figure is built from wage data, not quoted from a rate card. The U.S. Bureau of Labor Statistics puts the Houston metro mean electrician's wage at $29.55 an hour (OEWS, May 2025). A wage is what an employer pays; it leaves out payroll taxes, insurance, a vehicle, overhead and margin, so our examples build a billable figure as the wage times 3.0 and print that assumption next to every total. Cross-checks run on the Texas mean wage of $28.50 an hour (OEWS, May 2025, read from BLS itself) — the same statistic as the Houston basis, so the two methods compare like with like. The full arithmetic, job by job, is in the Texas electrician cost guide.

What electrical work covers

Repairs and fault-finding

Dead outlets, lights that flicker, breakers that trip, a circuit that has stopped working. The skilled part is the diagnosis: tracing a fault to the failed device, connection or breaker instead of replacing parts until the symptom stops. A repair is priced on what the fault turns out to be, which is why honest repair pricing starts with finding it.

Panels, breakers and service upgrades

The panel is where power enters and divides. Upgrading an older or full panel to 200 amps, replacing a damaged one, and the meter loop and service work that goes with it — this is the trade's biggest-ticket home job, the one most likely to need a city permit and inspection, and the benchmark priced above.

Fixtures, fans and outlets

Ceiling fans, light fixtures, switches and receptacles, swapped like-for-like on existing wiring or fitted new. The like-for-like swaps are the small, priceable jobs; a fitting where no wiring exists is a different and larger piece of work.

Chargers and whole-home protection

Level 2 EV chargers on a dedicated circuit, and surge protective devices fitted at the panel to guard the whole home. The charger units themselves carry clear prices — $599 to $635 for the two named in our guide — but an installed charger total depends on the run from your panel to your garage, and this site publishes no installed figure for it. The surge protector, by contrast, prices cleanly and is in the guide's table.

When to call an electrician — and when it can wait

Call now if an outlet or switch sparks or crackles, if you can smell burning near the panel or an outlet, if a breaker trips again straight after one reset, or if part of the home has lost power for no clear reason. Stop using the affected circuit, switch its breaker off, and do not keep resetting a breaker that will not stay on — a breaker that trips repeatedly is reporting a fault, not causing one.

Book a normal visit for planned work: a fan to swap, a charger to plan, a panel upgrade you are scheduling rather than reacting to. Nothing in that list gets worse this week, and planned work is priced from ordinary hours. Work outside normal hours usually carries a premium over the same job booked ahead — you are paying for hours nobody wants to work — and no official source publishes a standard emergency fee, so ask for the call-out charge before you agree to the visit.

How to choose an electrician in Texas

One state licence, three kinds of contractor

Texas licenses electricians through the Texas Department of Licensing and Regulation (TDLR), under Occupations Code Chapter 1305. Anyone who performs, or offers to perform, electrical work that is not exempt must be licensed, and must do that work through a licensed electrical contractor. TDLR issues three contractor licences: Electrical Contractor, Electrical Sign Contractor, and Residential Appliance Installation Contractor. The one a homeowner almost always needs is the first — its scope is the business of designing, installing, repairing and altering wiring for light, heat, power and signalling. The other two cover sign work and appliance installation respectively, and neither substitutes for it.

The licence is the state's, and it is valid anywhere in Texas. Cities run the permit and inspection side: a city may require inspections and charge a building permit fee, but it may not make a state licensee sit a city exam, and it may not charge state-licensed electricians registration-type fees for working there. So a company legal in Houston is legal in Austin — what changes by city is the permit, not the licence.

The ladder behind the company, and the master of record

Individuals hold their own licences on a ladder: Electrical Apprentice, then Residential Wireman or Journeyman Electrician, then Master Electrician, with parallel sign and appliance tracks. The rung that matters to a homeowner is the top one. Every Electrical Contractor must be, or employ, a licensed Master Electrician — the Master Electrician of Record. One master can serve only one contractor, unless he owns more than half of that business, and if he leaves, the company has 30 business days to notify TDLR and name a replacement. No master of record, no legal contractor.

The two-part licence check

A licence number on a truck proves nothing by itself. Run both halves of the check — it takes a few minutes on TDLR's official License Search:

  1. 1

    Take the company's licence number from its truck, quote or invoice. The number printed there carries a TECL prefix; in the search itself, the same number appears without it.

  2. 2

    Search the business by name or number and open the record titled Electrical Contractor (Type: EC). Confirm the business name, address and county match the company in front of you, the status reads Active, and the expiration date is in the future.

  3. 3

    On that same record, find the "Master:" line. It names the company's Master Electrician of Record, with his licence number and expiration date.

  4. 4

    Search again, this time for that master by name or by the number from step 3, and open his own record, titled Master Electrician (Type: ME). The name and number must match the contractor record, the status must read Active, and the expiration must be in the future.

  5. 5

    Both parts matter because of what the first record does not show: the contractor record names the master but does not print the status of the master's own licence. Only his Type: ME record shows whether that licence is active today.

  6. 6

    Optional third step: run the company through TDLR's separate final-orders search, which lists enforcement actions such as fines and revocations.

Insurance and the written quote

An Electrical Contractor must carry commercial general liability insurance at set minimums — $300,000 per occurrence, $600,000 aggregate, and $300,000 for products and completed operations — kept in force at all times, with the certificate filed with TDLR. Ask to see a current certificate anyway; the filing is a licence condition, the certificate is your proof on the day. Then get the price in writing, with exclusions named, before work starts.

Questions worth asking any company:

  • What is your Electrical Contractor licence number, and who is your Master Electrician of Record?
  • Is this quote written, and what does it leave out?
  • Does this job need a city permit, and who pulls it?
  • Will the work be inspected, and who arranges that?
  • If you find a bigger fault once you open things up, how do we agree the extra work before it is done?

Get a free electrician quote

Electricians in your city

Houston

The Houston page carries the fullest worked example in this group: a 200-amp panel upgrade priced line by line from the city's own fee schedule, the city's contractor-only permit rule explained, and the two-part check in full. Start with electricians in Houston and what they charge.

Dallas

The Dallas page follows the same shape — cost box first, then the licence check and how to choose — written for Dallas homes and Dallas permits rather than borrowed from the Houston page. See finding an electrician in Dallas.

Fort Worth

Fort Worth gets a page of its own, not a Dallas add-on: a separate city with its own permit office and its own housing stock. See Fort Worth electricians and costs.

Austin

Austin's page covers the same ground for the capital — what the work involves, what the benchmark jobs cost, and both halves of the licence check. See electricians serving Austin homes.

San Antonio

The San Antonio page is built the same way, cost box and licence steps included, so a quote can be set against a worked example before you commit. See San Antonio electricians and what they charge.

El Paso

El Paso's page stands on its own at the western end of the state — residential work first, with the same cost method and the same licence check. See hiring an electrician in El Paso.

Texas electrician questions

How much does an electrician cost in Texas?

There is no honest single figure for all electrical work, so this site prices named jobs instead. The benchmark: a 200-amp panel upgrade in a Houston home runs $1,090–$1,470 installed in our worked example, built from a retail unit price, the city's permit schedule and published wage data. A ceiling fan swap computes to $210–$305 and one GFCI outlet replacement to $85–$130. Diagnostic and service-call fees are not published: no official source publishes one.

Does an electrician need a licence in Texas?

Yes. TDLR licenses electricians under Occupations Code Chapter 1305, and non-exempt electrical work must be performed by a licensed person working through a licensed electrical contractor. The contractor licence comes in three types — Electrical, Electrical Sign, and Residential Appliance Installation — and the general one a homeowner needs is the Electrical Contractor licence.

How do I check a Texas electrician's licence?

Run the two-part check on TDLR License Search. First open the company's Electrical Contractor record (Type: EC): status Active, unexpired, and note the "Master:" line naming its Master Electrician of Record. Then open that master's own Master Electrician record (Type: ME) and confirm the name and number match and his status is also Active and unexpired. The second search is not a formality — the contractor record never prints the master's status.

What does TECL mean on an electrician's truck?

It is the prefix on the company's Electrical Contractor licence number — the number for licence 1234 is displayed as TECL 1234. It identifies the business's licence, and it is the number to type into TDLR License Search. What it does not tell you is whether the company's Master Electrician of Record is currently licensed; that is the second half of the check above.

Can I do my own electrical work in my Texas home?

State law exempts work done in a dwelling by a person who both owns and lives in that dwelling — both halves are required — and only where a municipal ordinance does not specifically regulate the work. It does not cover a rental, a flip, a relative's house, or anyone you hire: hired electrical work must be licensed. Cities can and do regulate further; in Houston, for example, an electrical permit can be issued only to a licensed, city-registered contractor, so there is no homeowner permit path for panel work there.

Do electricians charge a diagnostic or service-call fee?

Many do, but we publish no figure for one. No regulator, city or standards body publishes a Texas service-call fee, and TDLR does not regulate what electricians charge — it licenses them. Treat the fee as a question to settle before the visit: ask what the call-out costs, and whether any of it is credited toward the repair if you go ahead.

Disclaimer. The costs on this page are estimates only, computed from the sources below with their assumptions printed next to them. Your final price depends on your home, the job and the scope you agree, and costs vary by job, material and location. Always confirm a contractor's licence and insurance before work starts.

Sources

  • Texas Department of Licensing and Regulation — electrician licensing: contractor and individual licence types, Master Electrician of Record rule, insurance minimums, License Search and final-orders search (tdlr.texas.gov)
  • Texas Legislature — Occupations Code Chapter 1305, including §1305.151, §1305.201 and §1305.003(a)(6)
  • U.S. Bureau of Labor Statistics, OEWS May 2025 — electrician wages: Houston metro mean and Texas mean, both read from BLS (bls.gov)
  • City of Houston, Houston Permitting Center — 2026 Permit Fee Schedule (houstonpermittingcenter.org)
  • Lowe's — Square D Homeline 200-amp load centre value pack, retail price seen November 17, 2026
Call for a free quote Get a Quote