Roof Replacement Cost in Texas
Ask five websites what a roof replacement costs in Texas and you will get five different answers, none of them showing their working. This guide takes the other route: one real specification, priced line by line from sources we name — documented retail material prices, published wage data, a city fee schedule — with every assumption and every exclusion printed next to the total. It also covers the part of Texas roof cost nobody else explains properly: how insurance, a percentage deductible and the type of policy you hold change what you actually pay.
- Free quotes
- No obligation
- Costs researched from named sources
- Texas-focused
Quick answer
One fully documented Texas example: tearing off and replacing the roof of a 2,000 sq ft Houston home with architectural shingles — 24 squares of roof surface — builds up to $8,250–$9,950, or $345–$415 per square, from priced materials, wage-based labour, the city permit and landfill fees. Repairs are not priced here: no honest basis exists yet.

The cost table
| Job | Cost |
|---|---|
| Full roof replacement, architectural shingles, 24 squares (worked example below) | $8,250–$9,950 |
| Same job, per square of roof surface | $345–$415 |
| Roof repairs of any size | Not priced — see "What this guide does not price" |
That is the whole priced table, and its shortness is the point. Every other number in this guide is a component of that one example — a material price, a wage, a fee — shown so you can rebuild the total yourself and test any quote against it. For the same job in your city, start with roofers in Texas and your city page, or get a free quote.
How a roof is measured: squares are not square feet of house
Roofing is priced by the square: 100 sq ft of roof surface. Roof surface is not your home's floor area, and the difference is where most cost confusion starts.
Take the worked example's home: a single-storey footprint of 40 ft × 50 ft — 2,000 sq ft of floor. Its roof is a simple gable at an 8/12 pitch, and pitch stretches the surface: at that slope, every horizontal foot carries about 1.202 ft of roof. Multiply the footprint by the slope factor and the roof surface is about 2,404 sq ft — 24 squares, before overhangs and waste. A two-storey home with the same floor area has roughly half the footprint and a far smaller roof; a low, sprawling one-storey has a roof nearly as large as its floor plan. When a quote states a per-square price, check it against the measured squares of roof, not the square feet on your home's listing — and ask how the squares were measured.
How the cost is built
A replacement total is four blocks. Here is each block of the worked example, with its basis:
| Block | Amount | Basis |
|---|---|---|
| Shingles | $3,237.60 | GAF Timberline HDZ, 80 bundles × $40.47 (bulk list price at 39+ bundles; single bundle $44.97). 24 squares × 3 bundles per square, plus 10% cutting overage per GAF guidance. Home Depot list price documented October 17, 2026 |
| Underlayment | $357.00 | GAF FeltBuster, 3 rolls × $119.00; 1,000 sq ft per roll against 2,404 sq ft. Home Depot list price documented October 17, 2026 |
| Ridge cap | $125.94 | GAF Seal-A-Ridge, 2 bundles × $62.97; 25 linear ft per bundle against a 50 ft ridge. Home Depot list price documented October 17, 2026 |
| Labour | $3,992.40–$5,589.36 | 60–84 crew-hours at $66.54/hr — the BLS Houston mean roofer wage of $22.18 (OEWS, May 2025) × 3.0, a stated assumption for payroll burden, insurance, vehicles, overhead and margin |
| Permit | $353.15 | City of Houston: re-roof fee $255.67 + plan review $63.92 + administration $33.56, from the city's 2026 fee schedule — components below |
| Landfill tipping fee | $179.01 | 24 squares × 235 lb = 2.82 tons × $63.48/ton, the U.S. average tipping fee. The landfill fee only — hauling is not in it |
What is not in the build-up: starter strip, drip edge, nails and fasteners, flashing and valley metal, roof vents, leak barrier, decking replacement, and dumpster rental and hauling. No price for those lines was grounded in a source we can show you, so they are excluded and named rather than estimated. Hold that list against any quote: the lines are real costs, they are in every real quote, and they are the main reason real quotes typically run higher than this guide's range.
Worked example: the full arithmetic
The job: full tear-off of one existing shingle layer and replacement with GAF Timberline HDZ architectural shingles on a single-family home in Houston, TX. Total building area 2,000 sq ft; single-storey 40 ft × 50 ft footprint; simple gable, 8/12 pitch; roof surface ≈ 2,404 sq ft ≈ 24 squares. Houston is the example city because its official permit schedule is the one verified for this guide.
Materials. Shingles $3,237.60 + underlayment $357.00 + ridge cap $125.94 = $3,720.54 for the priced lines.
Labour, two ways. The crew-time assumption is 2.5–3.5 crew-hours per square — tear-off of one layer plus installation on a simple gable — giving 60–84 crew-hours for 24 squares. No authoritative install-time standard exists; the range is the sensitivity, and it is printed rather than hidden. Method 1 uses the Houston wage basis: $22.18 × 3.0 = $66.54 an hour, so labour is $3,992.40–$5,589.36. Method 2 recomputes independently on the Texas statewide wage: $22.69 × 3.0 = $68.07 an hour, so labour is $4,084.20–$5,717.88. Both wages are Bureau of Labor Statistics OEWS May 2025 figures — wages, not billable rates; the ×3.0 multiplier is this guide's stated assumption for everything a wage leaves out.
Permit. Houston prices a re-roof at 20% of the new-construction fee for the building. At 2,000 sq ft that fee is $1,278.36 — a $1,066.86 base charge plus 45 increments of $4.70 — so the re-roof fee is $255.67. Plan review at 25% of the permit fee adds $63.92; the administration fee adds $33.56. Total $353.15. Disclosure: the components come from the city's official 2026 schedule; the 20% basis is quoted from the city's adopted amendments rather than read in the ordinance text itself, and one actually-issued Houston re-roof permit showed no separate plan-review line — so this guide publishes the components, not just the total.
Disposal. The torn-off roof weighs at least 235 lb per square: 24 squares is 5,640 lb, or 2.82 tons. At the U.S. average landfill tipping fee of $63.48 a ton, the tipping fee is $179.01. That is the landfill charge only. The dumpster and the hauling to the landfill are real costs with no grounded price, and they sit in the exclusion list.
Totals. Method 1: $3,720.54 + $3,992.40 + $353.15 + $179.01 = $8,245.10 at the low end; $9,842.06 at the high end. Method 2: $8,336.90–$9,970.58. The two methods bracket $8,245–$9,971, so the published range is $8,250–$9,950 per job, and divided by the 24 measured squares, $345–$415 per square.
What kind of figure this is: a documented-cost build-up — retail prices for the lines that could be priced, labour at a wage multiple, the city's permit, the landfill fee. It is not a survey of quotes, and it is not "the average cost of a roof in Texas": no such survey stands behind it. It is a floor you can verify, built so that when a quote lands above it — as quotes normally will — you can ask which excluded lines, and how much margin, account for the difference.
Factors that change the result
- Roof surface and complexity. Squares drive everything. Steeper pitches, multiple slopes, valleys and penetrations all add surface, crew time and cutting waste beyond the simple gable's 10%.
- Layers coming off. The example tears off one layer. A second layer doubles tear-off labour and roughly doubles the tipping weight.
- The deck underneath. The example assumes the existing deck is sound. Rotten decking found at tear-off must be replaced before the new roof goes on — see the next section for why no price is attached to that here.
- Material. The example prices one shingle. Other materials and heavier shingle lines price differently, and none is figured in this guide until its prices are grounded the same way.
- Crew time. The 2.5–3.5 crew-hours per square is an assumption with a wide band deliberately: access, height and roof complexity move a real job inside or outside it.
- City. The permit block is Houston's, from Houston's schedule. Other Texas cities set their own fees and rules; the worked example does not travel unchanged.
Tear-off, decking and permit: the three line items to interrogate
Tear-off is in the example twice — in the crew-hours and in the tipping fee — and it is the first place quotes diverge: one quote may carry a dumpster and hauling as a visible line, another may bury disposal in the labour. Ask which.
Decking is the honest unknown. If tear-off exposes rotted deck boards or panels, they must be replaced before the new roof goes on; no roofer can see the deck's condition until the old roof is off, and no price for supplied-and-fitted decking was grounded for this guide — so the figure is omitted rather than invented. What you can do without a number: agree in writing, before work starts, how decking will be charged if it is needed, and require photos of any decking the crew says must go.
Permit is the line with a published basis: $353.15 on the example home, components shown above. A quote with no permit line on a full replacement is a quote for unpermitted work — in Houston a re-roof requires one, pulled by the company doing the job.
Paying with insurance: deductibles, policy types and the rules
In Texas, a large share of replacements are part-paid by a home insurance claim, usually after hail or wind. The claim does not change what the roof costs; it changes who pays which part — and three things decide your share.
Your deductible may be a percentage. Many Texas policies carry a separate wind/hail deductible set as a percentage of the home's insured value. The Texas Department of Insurance (TDI) works this example: a home insured for $150,000 with a 5% deductible means the homeowner owes $7,500, so a $6,500 roof repair pays $0; with a $500 deductible the same repair pays $6,000. Deductibles apply per claim, not per year. On a replacement, that percentage comes off the top of whatever the policy pays — read your declarations page before you file.
Replacement cost pays more than actual cash value. A replacement-cost policy pays to replace at current prices; an actual-cash-value policy pays replacement cost minus depreciation — the decrease in value from wear and age. TDI's roof example: a 10-year-old roof, a $10,000 current replacement price, a $2,000 deductible. Replacement cost pays $8,000. If the roof's actual cash value is $7,000, ACV pays $5,000. Replacement-cost claims are usually paid in two cheques — the first for the estimate minus depreciation and the deductible, the balance after the work is done.
Your deductible is yours to pay — by law. A contractor may not waive, absorb or rebate it: Business and Commerce Code §27.02(c) prohibits the offer itself, Insurance Code §707.002 makes paying it the policyholder's duty, and §707.004 lets an insurer hold back part of a replacement-cost payment until you show reasonable proof — a cancelled cheque, a card statement — that you paid it. A roofer who offers to "eat the deductible" is offering to break the law and to put your own payment at risk. Treat it as a disqualifier.
Your roofer cannot run your claim. Texas Insurance Code §4102.163 prohibits a contractor from acting as a public insurance adjuster — or advertising that they will — on a property where they do the work. Filing the claim for you, negotiating the settlement, or promising to recover "every dime you are owed" is adjuster work. The roofer's role is to inspect, document, estimate and build.
The claim sequence and the clock. TDI's published steps: file as soon as you can, with photos and video of the damage; prevent further damage (tarp the roof) and keep receipts; get the adjuster's contact details and be available; get estimates from more than one contractor; and remember that you pay your deductible to the contractor. The insurer's deadlines are in Insurance Code Chapter 542: acknowledge the claim within 15 days; accept or reject within 15 business days of receiving everything needed (extendable by 45 days with an explanation, plus 15 more in a weather catastrophe); pay within 5 business days of agreeing to pay. Your deadline to file is set by your own policy — there is no universal statutory filing deadline, whatever a salesperson tells you.
Why two quotes for the same roof differ
Quotes for one roof can sit far apart without either being dishonest, because a "roof replacement" is not one fixed scope. Compare line by line:
- Tear-off scope. One layer or two? Is the dumpster and hauling a visible line, buried in labour, or missing?
- What is under the shingles. Underlayment class differs — the example prices a named synthetic underlayment; a quote may carry felt, or a leak barrier the example excludes. Starter strip, drip edge, flashing and vents: in the price, or silent?
- Decking terms. Excluded until found (the honest default), priced per sheet in advance, or quietly assumed sound with the argument saved for later?
- Permit. Pulled by the company and itemised — $353.15 on the example home — or absent?
- Warranty tier. A manufacturer's enhanced warranty is only available through the right contractor tier: with GAF, the Golden Pledge is offered only by Master Elite contractors, and the Silver Pledge only from Certified Plus up. A quote promising an enhanced warranty from a contractor whose tier cannot offer it is a quote with a hole in it — check the tier on the manufacturer's own locator.
- Margin and labour basis. This guide builds labour at a wage × 3.0. A real company's rate carries its own insurance, supervision, warranty reserve and profit, and will not match a formula. What you are checking is not the rate itself but whether the quote can explain its own build-up the way this page explains the example's.
A quote that cannot be decomposed into these lines is a quote you cannot compare — and comparing is the whole game.
What this guide does not price — and why
- Repairs. A bundle of shingles is priced in this guide's sources; a repair is not, because repair pricing is driven by minimum call-out charges and by what an inspection finds — how many shingles, whether flashing and underlayment are involved, whether the leak's source is even at the visible damage. No primary source grounds a minimum charge, so no repair figure is published. Anyone quoting you a repair price sight-unseen is guessing.
- Decking replacement. No documented price for supplied-and-fitted decking was obtained. It stays a named exclusion with a procedure — agree the charging basis in writing before tear-off, require photos — instead of a number.
- Metal, tile and other roof systems. The worked example is architectural shingles because that is the system whose material prices were documented. Pricing other systems from the shingle example's shape would be fabrication with extra steps.
- Dumpster rental and hauling. Only the landfill tipping fee is grounded. The rental and transport market was not priced from a source, so the lines stay excluded and named.
Each of these is a gap we would rather print than fill. When a price basis for one of them is verified, the row will appear here with its source, the way the rows above did.
Common mistakes and tips
- Comparing quotes by the total alone. Two totals can describe two different scopes. Decompose both against the lines in this guide before comparing anything.
- Accepting the first post-storm contract. Storm weeks attract crews who will not be findable in a year. Verify the insurance certificate with the insurer, check the manufacturer tier on the maker's locator, and take the hour the checks require.
- Letting anyone "cover" the deductible. Illegal under §27.02, and it can stall your own replacement-cost payment under the proof-of-payment rule. There is no version of this offer that benefits you.
- Assuming the permit is optional or yours to pull. On a Houston replacement it is required, it is the company's job, and it is $353.15 of the example's build-up. Price it, don't skip it.
- Filing before reading your declarations page. Know your wind/hail deductible percentage and whether your policy is replacement cost or ACV before the claim starts, not during it.
Texas roof replacement questions
Why does this guide publish only one priced example?
Because it is the only replacement whose inputs could all be grounded: documented retail prices for the materials, published Bureau of Labor Statistics wages for the labour basis, and a city fee schedule for the permit. Other guides average aggregator figures that conflict with each other; this one builds a single example from sources it names, prints its assumptions and exclusions, and shows the arithmetic. One verifiable example is worth more than ten borrowed ranges.
Will my quotes be higher than $8,250–$9,950?
Probably, and the guide says why: the build-up excludes starter strip, drip edge, fasteners, flashing, vents, leak barrier, decking, and dumpster and hauling, and its labour uses a stated wage multiplier rather than a company's real rate card. Those lines are in real quotes. Use the range as a verified floor and ask any quote above it to account for the difference line by line.
How is a roof measured, and why is it bigger than my house?
By the square — 100 sq ft of roof surface. Pitch stretches surface beyond floor area: the example's 2,000 sq ft single-storey footprint carries about 2,404 sq ft of roof at an 8/12 pitch, or 24 squares. Measure the roof, not the listing.
Can insurance pay for my roof replacement?
Often, after covered storm damage — but your share is set by your deductible and your policy type. A percentage wind/hail deductible comes off the top (TDI's example: 5% of a $150,000 insured value is $7,500), and an actual-cash-value policy subtracts depreciation where a replacement-cost policy does not (TDI's example: $8,000 vs $5,000 on a $10,000 roof with a $2,000 deductible). File promptly with photos, tarp against further damage, and keep receipts; your filing deadline is in your policy.
Can a roofer pay my deductible for me?
No. Business and Commerce Code §27.02(c) prohibits a contractor from waiving, absorbing or rebating your deductible — offering to do it is itself an offence. Insurance Code §707.002 makes the deductible yours to pay, and §707.004 lets your insurer require reasonable proof of payment before releasing the full amount. The Texas Department of Insurance treats the offer as a scam sign.
Do I need a permit to replace my roof in Texas?
It depends on the city — Texas permit rules are municipal. In Houston, the verified case in this guide, a residential re-roof requires a building permit pulled by the company doing the work; roof covering of 100 sq ft or less is exempt. Check your own city's position on its ServicesInn city page or with the city before work starts, and treat a quote with no permit line on a full replacement as a warning.
Where to go next
The benchmark above is a Houston job; your roof is in one city, with its own permit rules and its own page: roofers in Houston, TX · roofers in Dallas, TX · roofers in Fort Worth, TX · roofers in Austin, TX · roofers in San Antonio, TX · roofers in El Paso, TX. The statewide picture — what roofing covers and the checks that replace a Texas licence — is on the Roofers in Texas hub. Ready to price your own roof? Get a free quote or call from any city page.
Disclaimer. The costs on this page are estimates only, computed from the sources below with their assumptions printed next to them. Your final price depends on your home, the job and the scope you agree, and costs vary by job, material and location. Always confirm a roofer's insurance and credentials before work starts.
Sources
- The Home Depot — GAF Timberline HDZ shingles (price read live at a Houston store, November 18, 2026), GAF FeltBuster underlayment, GAF Seal-A-Ridge ridge cap (list prices documented October 17, 2026)
- U.S. Bureau of Labor Statistics, OEWS May 2025 — roofer wages, Houston metro (bls.gov) and Texas (via the U.S. Department of Labor's O*NET republication of BLS OEWS)
- City of Houston, Houston Permitting Center — 2026 Permit Fee Schedule; Residential Re-Roof Only Worksheet CE-1109; One-Stop Guide CE-1050 (houstonpermittingcenter.org)
- Texas Department of Insurance — deductibles guide; Home Insurance Guide (RCV vs ACV); claim payment steps and Chapter 542 deadlines; roofing and insurance law; contractor scam guidance (tdi.texas.gov)
- Texas Insurance Code §§4102.163, 4102.001(3), 707.002, 707.004, Ch. 542, Ch. 2210; Texas Business and Commerce Code §27.02
- GAF — Timberline HDZ coverage and bundle specifications; contractor tiers and warranty matrix (gaf.com)
- Environmental Research & Education Foundation — U.S. average landfill tipping fee, 2025 (via Waste Today); Zonda Cost vs Value 2025 — shingle tear-off weight specification
