HVAC Companies in Texas
A dead air conditioner in August and a furnace that will not light in January ask the same two questions: who is licensed to fix it, and what should the job cost? HVAC companies in Texas handle cooling, heating and heat pumps in homes across the state. This page sets out what the trade covers, prices one benchmark replacement job with its working shown, and teaches the state licence check. Then choose your city.

- Free quotes
- No obligation
- Licensed professionals
- Texas-focused
What does HVAC work cost in Texas?
HVAC companies in Texas repair and replace the systems that cool and heat homes statewide. One benchmark, priced in full in our cost guide: swapping a complete 3-ton split system in a Houston home runs $5,900–$6,300 installed, permit included. A single small repair — a failed run capacitor — computes to $75–$120 before any trip fee.
Hold those two numbers the right way round. The replacement figure is one named job — a Goodman condenser, coil and gas furnace package at a retail price of $4,705.37, twelve to sixteen hours of labour built from published wage data under a stated assumption, and Houston's mechanical permit — not a Texas average, because no honest statewide average exists. Labour is anchored to the U.S. Bureau of Labor Statistics mean wage for heating and cooling mechanics: $28.43 an hour in Texas (OEWS, May 2025). That is a wage, not a billable rate; it leaves out payroll taxes, insurance, vehicles, overhead and margin, which is why our examples build the billable figure as the wage times 3.0 and say so wherever a total appears. The full arithmetic lives in the Texas HVAC replacement cost guide.
What HVAC work covers
Cooling
The side of the trade Texas uses hardest: central air conditioners and heat pumps in cooling mode, the evaporator coil inside, and the condensate drain that carries away the moisture the system pulls from indoor air. Most repair calls in this state are cooling calls — a system that runs but does not cool, cools unevenly, or stops altogether.
Heating
Gas furnaces, electric air handlers and heat pumps in heating mode. Heating work is real in Texas even where winters are short: a furnace that will not ignite and a heat pump that cannot keep up are the standard winter calls, and they land on the same companies that handle the cooling side.
Replacement and installation
Whole-system changeouts — condenser, coil and furnace or air handler together — plus first-time installs. Replacement is where the money concentrates, where permits and inspections apply, and where the federal efficiency floor explained in the cost guide decides what may legally go in.
Repairs and refrigerant work
Component repairs on an existing system: capacitors, controls, motors, and work on the refrigerant circuit. One boundary is set by federal law, not by preference — under EPA Section 608 rules, only certified technicians may buy refrigerant or service the part of the system that holds it, so refrigerant work is never a do-it-yourself job.
When to call a professional — and when it can wait
Call promptly if the cooling fails during hot weather with anyone vulnerable in the house — an older adult, an infant, someone with a chronic condition — because indoor heat becomes a health question, not a comfort one. Do the same for a burning smell, a breaker that trips again after one reset, or ice forming on the refrigerant lines.
Book a normal visit for a system that cools but noisily, a room that never quite reaches the set temperature, or a furnace due a check before winter. Check the simple things first: thermostat set to cool and below room temperature, a clean filter in place, the breaker on. If none of that restores cooling, the fault is inside equipment a licensed contractor should open.
How to choose an HVAC company in Texas
The licence that matters is the contractor's
Texas licenses heating and cooling work through the Texas Department of Licensing and Regulation (TDLR), under the Air Conditioning and Refrigeration programme (Occupations Code Chapter 1302). Anyone offering air conditioning and refrigeration contracting must hold an ACR contractor licence — Class A, which covers equipment of any size, or Class B, limited to cooling systems of 25 tons and under and heating systems of 1.5 million BTU an hour and under. Home systems sit far inside the Class B limits. Licences also carry an endorsement: E for Environmental Air Conditioning — the home comfort category — R for Commercial Refrigeration and Process work, or C for combined.
The trap to avoid is the technician credential. The people who do the hands-on work hold a TDLR technician registration or certification, and by law they work under a licensed contractor's supervision. A registration card is not a licence to contract: a company that offers you work must itself employ a licensed ACR contractor at each permanent location, and if it does not, TDLR's own guidance says it cannot collect a fee or enforce the contract.
The two-part check
-
1
Get the company's licence number — the TACLA or TACLB number printed on its truck, bid or website.
-
2
Search it in the official TDLR License Search and open the record. Confirm three things: it is an ACR Contractor licence rather than a technician registration, its status is Active and unexpired, and its class and endorsement cover your job — for a home system, Class A or B with the E or C endorsement.
-
3
Run the same name through TDLR's final-orders search, which lists enforcement actions — fines, suspensions, revocations.
-
4
Ask for the certificate of insurance. The licence requires commercial general liability cover at set minimums — $300,000 per occurrence for Class A, $100,000 for Class B, with higher aggregate amounts — kept in force for as long as the licence is active.
Your city pages carry this check in full working detail; the short version is: contractor licence first, enforcement record second, insurance certificate third.
Questions to ask before you sign
- What is your TDLR contractor licence number, and which class and endorsement does it carry?
- Is the quote itemised — equipment by model, labour, permit — or a single lump figure?
- Who pulls the permit, and is its fee inside the quote?
- What warranty covers the equipment, and what covers the labour?
- If the diagnosis changes once the system is open, how is extra work agreed before it is done?
HVAC in your city
The Houston page carries this cluster's full worked example: the 3-ton system replacement priced line by line, the city's mechanical permit worked into the total, and a heat-safety section for a home waiting without cooling. Start with AC repair in Houston and what it costs.
The Dallas page follows the same structure — repair and replacement costs first, the licence check, then the call — for homes across the city. See heating and cooling help in Dallas.
Fort Worth gets its own page rather than a Dallas overflow: separate city, separate permit office, separate pricing context. See HVAC services in Fort Worth.
Austin's page covers the same ground for the capital — what the work involves, what the benchmark jobs cost, and how the TDLR check runs. See AC repair and replacement in Austin.
The San Antonio page is built the same way, cost box and licence steps included, so a quote can be set against a worked example. See HVAC companies serving San Antonio homes.
El Paso's page stands on its own at the western end of the state — same structure, its own city context. See heating and cooling in El Paso.
Texas HVAC questions
How much does it cost to replace an HVAC system in Texas?
This site publishes one benchmark rather than a statewide average: replacing a complete 3-ton split system — condenser, coil and gas furnace — in a Houston home runs $5,900–$6,300 installed, built from a named equipment package at $4,705.37 retail, wage-based labour under a stated assumption, and Houston's permit. Other repairs and system sizes are priced only where sources allow; the cost guide shows what is covered and what is not.
Does an HVAC company in Texas need to be licensed?
Yes. Offering air conditioning and refrigeration contracting requires a TDLR ACR contractor licence under Occupations Code Chapter 1302 — Class A for any size of equipment, Class B up to 25 tons of cooling. The technicians a company sends must be TDLR-registered or certified and supervised by that contractor; their credential alone never authorises a company to contract with you.
How do I check a Texas HVAC licence?
Take the TACLA or TACLB number from the company's truck, bid or website and search it in the TDLR License Search. Confirm the record is a contractor licence — not a technician registration — with Active status, and that the class and endorsement fit your job. Then check the TDLR final-orders search for enforcement actions, and ask to see the insurance certificate the licence requires.
Do I need a permit to replace my air conditioner in Texas?
Texas issues no state installation permit — the state licenses the contractor, and cities issue permits. Houston, for example, requires a mechanical permit and an inspection for an air conditioning replacement, pulled by a contractor registered with the city. Other Texas cities set their own rules, so the permit line on a quote is a city question; ask who pulls it and whether the fee is included.
Can I buy refrigerant and top up my own system?
No. Under EPA Section 608, refrigerant for home air conditioning equipment may be sold only to certified technicians, and the work itself — recovering, charging, opening the circuit — belongs to certified technicians working for a licensed contractor. There is no lawful do-it-yourself top-up, and a system that keeps needing refrigerant has a leak to find, not a refill schedule.
Should I repair my system or replace it?
Price both, on paper. A single failed component on a system that has otherwise run well is a repair conversation; repeated breakdowns, a major component failure, or a system whose replacement would also have to meet today's efficiency floor anyway push toward replacement. The cost guide works through the questions to ask — without a rule of thumb dressed up as fact.
Disclaimer. The costs on this page are estimates only, computed from the sources below with their assumptions printed next to them. Your final price depends on your home, the job and the scope you agree, and costs vary by job, material and location. Always confirm a contractor's licence and insurance before work starts.
Sources
- Texas Department of Licensing and Regulation — ACR contractor licensing: classes, endorsements, insurance minimums, License Search and final-orders search (tdlr.texas.gov)
- U.S. Bureau of Labor Statistics, OEWS May 2025 — heating, air conditioning and refrigeration mechanic wages, Texas and Houston metro (bls.gov; figures cross-checked via the U.S. Department of Labor's O*NET republication of BLS OEWS)
- City of Houston, Houston Permitting Center — mechanical permit for air conditioning replacement; Alteration of HVAC instrument (houstonpermittingcenter.org)
- U.S. Department of Energy — 2023 central air conditioner standards FAQ: Southeast region SEER2 minimums (energy.gov)
- U.S. Environmental Protection Agency — Section 608 refrigerant sales restriction (epa.gov)
- Home Outlet Direct — Goodman 3-ton split system package GLXS4MA3610 / CHPTA3630C3 / GRVT800804CN, retail price seen November 17, 2026