Pest Control Cost in Texas — Every Figure Built From Sources
Ask what pest control costs in Texas and the published answers mix one-time prices with monthly plan prices in the same table, disagree with each other by wide margins, and show no working. This guide is built differently. It fixes one home, prices three units that are never blended — a one-time visit, a quarterly visit, a full first year — prints every input, runs the arithmetic on two separate wage bases, and names the jobs Texas law makes unpriceable, with the reason for each.
- Free quotes
- No obligation
- Licensed professionals
- Texas-focused
Quick answer
For a 2,000 sq ft, 3-bedroom, 2-bathroom Texas home, a one-time general pest treatment costs $60–$125 before sales tax, a quarterly maintenance visit $30–$65, and the first year of quarterly service $150–$320. Texas taxes this service, so the combined rate for the service address — 8.25% inside Houston city limits — still has to go on top of each figure. Houston homeowners can go straight to pest control in Houston for the same figures worked as a city page.

Cost by service type
One home throughout: 2,000 sq ft, 3 bedrooms, 2 bathrooms, single storey on a slab, footprint roughly 40 × 50 ft (an exterior perimeter of about 180 linear feet), general pests only — no active heavy infestation, no termites. Every figure is before sales tax; further down, the tax section sets out the rule and shows what the combined rate does to each row.
| Service | Basis | Cost before tax | With tax at 8.25% (Houston in-city) |
|---|---|---|---|
| One-time general treatment | 1–2 technician-hours + chemical | $60–$125 | $65–$135 |
| Quarterly maintenance visit | 0.5–1.0 technician-hours + chemical | $30–$65 | $32–$70 |
| First year of quarterly service | First visit + 3 maintenance visits | $150–$320 | $162–$346 |
| Each following year | 4 maintenance visits | $120–$260 | — |
| Termite treatment | Set per property after inspection | Not priced — see below | — |
| WDI inspection for a home sale | Fee set by each business | Not priced — see below | — |
| Mosquito service · rodent control/exclusion · bed bugs | Different scopes and products | Not priced — see below | — |
How each figure is built
Every number above traces back to three inputs — two published, one assumed, and the assumed one is flagged wherever it appears. Before the inputs, though, comes the finding that reverses what most people expect: the chemical is not what a pest control visit costs.
The chemical line — derived from a label, and small. The examples price one lawful, labelled way of doing the job, using a professional concentrate in routine structural use: Demand CS (Syngenta; lambda-cyhalothrin 9.7%; EPA Reg. No. 100-1066). Its EPA-registered label fixes the rate per treated area — 0.2 fl oz per gallon of water for maintenance, 0.4 for clean-out, 0.8 for severe infestations — and directs a perimeter band up to 7 feet wide and 2 feet up the foundation. Our home's treated band is about 180 linear feet × 9 feet ≈ 1,620 sq ft; at the clean-out rate that takes roughly 0.65 fl oz of concentrate, and interior crack-and-crevice work uses a fraction of a gallon of finished spray. Declared total: 0.5–1.0 fl oz per visit. The concentrate retailed at $43.95 (8 fl oz) and $167.95 (32 fl oz) on November 17, 2026 — $5.25–$5.49 per fl oz. Chemical per visit: about $3–$6. This derivation does not claim companies use this specific product; it prices one lawful, labelled way of doing the job so the chemical line is a computed input, not a guess. The conclusion survives any product swap: at label rates, the chemical in a general visit costs single dollars. The visit is priced by the technician's time and the truck roll.
Input 1 — the wage (sourced). From the Bureau of Labor Statistics' OEWS survey (May 2025): Pest Control Workers (SOC 37-2021) earn a mean of $19.53 an hour in the Houston metro and $19.90 an hour across Texas — unusually, the statewide mean is the higher of the two for this occupation. Handle the figures with two cautions. What OEWS measures is what employers pay in wages; it is not a price list, and it leaves out payroll taxes, benefits, insurance, vehicles, chemicals, overhead and profit entirely. It also leaves out the self-employed, who are a real share of this trade, because the survey covers wage-and-salary jobs in establishments. Closest official benchmark for the labour in a treatment — yes. A survey of company prices — no.
Input 2 — the multiplier (assumption). A wage becomes something a customer can be billed only after the costs around it are loaded on. The examples load them with a single declared 3.0× assumption, covering payroll burden, the liability insurance every licensed Texas business must file ($500,000/$1,000,000 minimums), vehicle, equipment, chemical handling, overhead and margin. Applied to the two wages, it gives $58.59 per technician-hour (Houston) and $59.70 (Texas). Because the whole build leans on this one assumption, here is what moving it does, on the Houston basis: 2.5× gives $48.83 per technician-hour, 3.5× gives $68.36. All published ranges hold 3.0×. A quote landing far outside them is not automatically a bad quote — it is a reason to ask what scope or cost is sitting behind it.
Input 3 — the technician time (assumption). No regulator or statistics agency publishes how long a treatment takes, so the hours are declared assumptions: 1–2 technician-hours on site for a one-time treatment (inspection, interior work, exterior barrier), 0.5–1.0 technician-hours for a quarterly maintenance visit. The width of each range is the sensitivity.
The cross-check. Each example is computed on both wage bases:
| Example | Houston basis ($58.59/hr) | Texas basis ($59.70/hr) |
|---|---|---|
| One-time treatment | 1–2 hrs + $3–$6 chemical = $61.59–$123.18 | $62.70–$125.40 |
| Quarterly visit | 0.5–1.0 hrs + ~$3 chemical = $32.30–$61.59 | $32.85–$62.70 |
The methods agree within about 2%, and the published ranges are the rounded union: $60–$125 and $30–$65, before tax.
Worked example: the first year, end to end
The comparison no incumbent guide works in full: what a year of service actually totals, in separated units.
- First visit (one-time basis — full inspection, interior work, exterior barrier): $60–$125
- Three quarterly maintenance visits (months 3, 6 and 9): 3 × $30–$65 = $90–$195
- First-year total: $150–$320 before tax — $162–$346 with tax at 8.25%
- Each following year (four maintenance visits): $120–$260 before tax
No first-visit premium is added and no plan discount is subtracted — not because neither exists, but because both are individual contract terms and no primary source establishes a typical value for either. No value is assigned to return visits between scheduled ones, for the same reason. If a company's plan quote differs from this arithmetic, the difference lives in exactly those terms — the first-visit price, the per-visit price, what re-service includes, and the cancellation terms — and those are the four things to get in writing.
Factors that change the cost
- Perimeter and treated area. The barrier runs around the house, not across its floor plan. The example assumes about 180 linear feet; a sprawling single storey treats more band than a compact two-storey of equal area.
- Severity. The product label steps its own rates by intensity — maintenance, clean-out, severe — and heavier work means more time on site and more visits before a maintenance rhythm is possible.
- Interior scope. A maintenance visit is mostly the exterior barrier. Interior crack-and-crevice work across many rooms is what pushes a visit toward the one-time range.
- Frequency, honestly stated. Quarterly arithmetic is four smaller visits, not one big one divided by four. Monthly schedules multiply the per-visit unit further; compare any plan on its first-year total, never its per-visit headline alone.
- Scope creep at the boundary. Termite work, rodent exclusion, bed bug work and mosquito service are different scopes with different products. A single bundled figure that silently includes them is not comparable with a general-treatment figure that does not.
- Tax treatment. Some quotes fold sales tax in; some add it at the invoice. At 8.25%, that alone is about a $10 difference on a $125 treatment.
Termite proposals: compare the documents, not a price
This guide prices no termite treatment, because Texas law itself prevents an honest figure. The termite rules define several lawful treatment types — full barriers, partial treatments, spot treatments (a limited area under 10 linear or square feet) and baiting systems — and require every proposal to state its own specification: the termiticide concentration, or the minimum number of bait stations, for that property, set by a licensee in the termite category after inspection. Chemical volume scales with the measured perimeter and the construction type; warranty terms — which the disclosure must state in full — are part of the price and vary. Two proposals for the same house can legitimately describe different jobs.
What the law gives you instead of a price is a package. Before any termite treatment begins, the business must hand you a written estimate with disclosure documents, prepared only by a certified applicator or licensed technician licensed in the Termite and Wood Destroying Insect Control category, containing:
- The business name, address, phone number and TPCL number, with the estimate date
- A diagram of the structure — numerical perimeter measurements, areas of active or previous activity, areas to be treated, conducive conditions, construction details
- A label for any pesticide recommended or used
- Complete warranty details, if any
- The concentration of termiticide, or the minimum number of bait stations
- The Consumer Information Sheet and the statement "Licensed and regulated by: Texas Department of Agriculture…"
- The rule's own definitions of partial, spot, baiting and barrier treatments, and its caution that specifications and warranties vary widely
Compare two proposals on those documents, line by line: diagram against diagram, concentration against concentration, warranty against warranty. And run the licence check first — the business must hold the termite category, and its categories are printed on its row in the state's published licence list, as the pest control hub teaches step by step. A proposal missing the diagram, the label or the stated concentration is missing things Texas law requires, whatever its price says.
The same discipline covers the WDI inspection when a home is sold. The report must be made on the state's prescribed form — the Texas Official Wood Destroying Insect Report, SPCS/T-5 — with no alterations permitted, and the form states on its face that it is not a structural damage report or a warranty of absence. Texas prescribes the form and the inspection procedure; it publishes no fee, and no statute sets one, so this guide prints the form number and no price.
Sales tax: the line most guides never mention
Structural pest control is a taxable service in Texas. The Texas Comptroller's Publication 94-114, written for pest control businesses, states it directly: providers of structural pest control services "must collect sales tax from your customers (even when pests are not found)", on the total amount charged, including any additional fees. The rate is 6.25% state tax plus up to 2% local tax, combined at the rate for the address where the service is performed — 8.25% inside Houston city limits.
That is why every range in this guide is quoted before tax, with the with-tax figures beside them. A quote that shows no tax is not necessarily cheaper — the company owes the tax either way — so keep it as a question to ask ("does this quote include tax?"), never an accusation.
Common mistakes when comparing pest control quotes
- Mixing units. A one-time price, a per-visit plan price and a monthly figure are three different units. Convert everything to a first-year total before comparing.
- Assuming the chemical drives the price. At label rates the chemical in a general visit costs about $3–$6. Quotes differ because time, scope and contract terms differ — ask about those.
- Comparing a pre-tax quote with a tax-included one. At Houston's rate the tax alone accounts for 8.25% of the gap between two quotes. Put both on the same footing — total, tax included — before judging either.
- Trusting a printed licence number. Verify it on the state's published list, and check the category, the licence expiry, the insurance expiry and the named responsible applicator on the same row.
- Accepting a termite quote on a number alone. Without the diagram, the pesticide label and the stated concentration or bait-station count, there is no defined job to price — and Texas requires those documents before treatment.
- Reading a WDI report as protection. The prescribed form says it is not a damage report and not a warranty. Price it as an inspection, and read it as one.
What this guide does not price — and why
- Termite treatment. Texas law sets the specification per property — treatment type, concentration or station count, measured perimeter, construction — and warranty terms form part of the price. No standard job exists to attach a figure to. The disclosure package above is the comparison tool the law provides instead.
- The WDI inspection fee. The Department of Agriculture prescribes the form (SPCS/T-5), the procedure and the record-keeping, but publishes no fee; none is set by statute. Fees are each business's own.
- Mosquito service, rodent control and exclusion, bed bugs, yard flea and tick work, wildlife removal. Different scopes, products and label rates from the general-pest derivation — exclusion is largely construction labour, and yard work crosses into the Lawn and Ornamental licence category. No grounded basis was derived for any of them in this stage, so no figures.
- Plan economics as market facts — "typical" first-visit premiums, plan discounts, monthly-versus-quarterly price ladders, standard re-service terms. These are individual companies' contract terms; no primary source establishes typical values. The first-year example above assumes none of them and says so.
Frequently asked questions
How much does pest control cost in Texas?
For a 2,000 sq ft, 3-bedroom, 2-bathroom home: $60–$125 for a one-time general treatment, $30–$65 per quarterly maintenance visit, and $150–$320 for the first year of quarterly service — all before sales tax. No company was surveyed to get them; they are computed on this page from declared time assumptions, published Bureau of Labor Statistics wages loaded by a stated 3.0× assumption, and a chemical line worked out from a pesticide label.
Why do online pest control prices disagree so much?
Mostly units. Guides mix one-time prices, per-visit plan prices and monthly figures inside single tables, and few show any method. Separated into units and built from stated inputs, the same job looks like this guide's table: a one-time unit, a smaller maintenance unit, and a first-year total that is arithmetic on the two.
How much does termite treatment cost in Texas?
This guide does not publish a figure, because Texas law defines the job per property: the treatment type, the termiticide concentration or bait-station count, and the warranty are all set in a written disclosure after inspection. Compare proposals on those documents — diagram, label, concentration, warranty — and confirm the company holds the Termite and Wood Destroying Insect Control category before comparing anything.
Is pest control taxable in Texas?
Yes. The Comptroller's guidance for the trade (Publication 94-114) requires providers of structural pest control services to collect sales tax on the total charge, including additional fees, even when no pests are found. The combined rate follows the service address — 8.25% inside Houston city limits. Every range in this guide is quoted before tax.
What does a quarterly pest control plan actually cost over a year?
On this guide's computed basis, for the stated home: a first visit at $60–$125 plus three quarterly visits at $30–$65 gives a first-year total of $150–$320 before tax; each following year of four maintenance visits runs $120–$260. No first-visit premium or plan discount is assumed, because those are contract terms no source establishes as typical — get a company's own terms in writing and compare its first-year total against these units.
How do I verify a pest control company before paying?
Free, on the Department of Agriculture's "Structural Pest Control Reports: Current Licenses" page: download the Commercial Business list, find the company by name or TPCL number, and check the categories match your job, the licence and insurance expiries are in the future, and a Responsible Certified Applicator is named. The hub walks through the check in full.
Next step
Run your own home through the same three inputs — perimeter, severity, the per-visit unit — and the quotes you collect become readable. Your city page is the place to do it: Houston, Dallas, Fort Worth, Austin, San Antonio or El Paso. Or get a free quote and put the category, paperwork and tax questions to the companies that reply.
Disclaimer. The costs on this page are estimates only, computed from the sources below with their assumptions printed next to them. Your final price depends on your home, the job and the scope you agree, and costs vary by job, material and location. Always confirm a company's licence, its categories and its insurance before work starts.
Sources
- Texas Department of Agriculture, Structural Pest Control Service — business and applicator licensing; insurance filing; "Structural Pest Control Reports: Current Licenses"; the Official Texas Wood Destroying Insect Report, SPCS/T-5 (texasagriculture.gov)
- Texas Occupations Code Chapter 1951 — Structural Pest Control Act, §§1951.201, 1951.255, 1951.301 (statutes.capitol.texas.gov)
- Texas Administrative Code, Title 4 — §7.123 (insurance), §7.124 (licence categories), §7.144 (use records), §7.147 (consumer information sheet), §7.174 (termite disclosures), §7.176 (WDI report form)
- Texas Comptroller of Public Accounts — Publication 94-114, "Pest Control Services" (comptroller.texas.gov)
- Syngenta — Demand CS Insecticide label, EPA Reg. No. 100-1066 (label rates and perimeter band); retail listings at Pestrong and DoMyOwn, read November 17, 2026
- U.S. Bureau of Labor Statistics, OEWS May 2025 — Pest Control Workers (SOC 37-2021) wages, Houston metro and Texas (bls.gov; wage means read via republication of the OEWS file and cross-checked against the U.S. Department of Labor's republications — re-check at QA)
