Pest Control in Houston, TX
For a 2,000 sq ft, 3-bedroom, 2-bathroom Houston home, a one-time general pest treatment runs $60–$125 before sales tax in the worked example below — $65–$135 with tax at 8.25%. A quarterly maintenance visit runs $30–$65 before tax. Every input is shown, and so is the licence check that confirms a company may legally do the work.
Pest control in Houston, TX is a state-licensed trade — licensed by the Texas Department of Agriculture, in categories that decide what a company may treat. That gives a Houston homeowner two things to get right: what a treatment should cost, computed openly, and whether the company quoting holds the category for the job. This page does both, then walks through the two pieces of Texas paperwork — the termite disclosure package and the official wood-destroying insect report — that protect you on the bigger jobs.
Pest control costs in Houston at a glance
One home stands behind every figure in the box: 2,000 sq ft, 3 bedrooms, 2 bathrooms, single storey on a slab, general pests only. And every figure is before sales tax — structural pest control is taxable in Texas, so the tax is shown separately rather than folded in. The with-tax column uses Houston's combined 8.25% rate for an address inside city limits; the exact rate follows your address.
| Service | Before tax | With tax at 8.25% |
|---|---|---|
| One-time general treatment | $60–$125 | $65–$135 |
| Quarterly maintenance visit | $30–$65 per visit | $32–$70 per visit |
| First year of quarterly service (first visit + 3 maintenance visits) | $150–$320 | $162–$346 |
Not priced in this table: termite treatment, the wood-destroying insect inspection used in home sales, mosquito service, rodent exclusion and bed bug work. No verified price basis exists for any of them — the termite and inspection sections below explain what Texas law gives you instead of a number.
- Free quotes
- No obligation
- Licensed professionals
- Texas-focused

What a general treatment includes — the scope these prices assume
A general treatment under the Pest Control category of the state licence covers pests in and around the home that attack its contents or furnishings or are a general nuisance — cockroaches, ants, spiders, silverfish, crickets and the like — but not pests that attack the building itself.
The visit these prices assume has three parts. Inspection and identification first: the certified applicator is the person responsible for inspection and identification, and the treatment follows from what is actually there. Interior work where the activity is — crack-and-crevice application in the rooms and voids the label allows. An exterior barrier around the foundation, applied at the rate and band width the product's EPA label directs.
Two paperwork points belong to the visit itself. For an indoor treatment at a private residence, the applicator or technician must make the Department of Agriculture's Consumer Information Sheet available to you — the department's own sheet, not the company's version. And whatever is applied is written into the company's use records — product name, EPA registration number, amount, mixing rate, target pest, date — and kept for two years. You can ask what was sprayed, and there is a record that answers.
The worked example, in full
Take the one-time treatment. Start with the chemical, because it is the part people assume drives the price — and it does not.
The example prices one lawful, labelled way of doing the job, using a professional concentrate in routine structural use: Demand CS (Syngenta; EPA Reg. No. 100-1066). Its label sets the rates: 0.2 fl oz per gallon of water for maintenance, 0.4 for clean-out, 0.8 for severe infestations, and for a perimeter barrier, application in a band up to 7 feet wide around the structure and up to 2 feet up the foundation. Our home's perimeter is about 180 linear feet (a roughly 40 × 50 ft footprint — a declared assumption), so the treated band is about 1,620 sq ft. At the label's clean-out rate that is roughly 0.65 fl oz of concentrate for the barrier; interior crack-and-crevice work uses a fraction of a gallon of finished spray. Declared total: 0.5–1.0 fl oz of concentrate per visit. The concentrate retailed at $43.95 for 8 fl oz and $167.95 for 32 fl oz on November 17, 2026 — $5.25–$5.49 per fl oz. The chemical line of a visit is about $3–$6. A general pest visit is priced by the technician's time and the truck roll, not by the chemical.
Time is the second input, and it is an assumption, declared as one: no regulator or statistics agency publishes treatment times. A one-time treatment — inspection, interior work, exterior barrier — is assumed to take 1–2 technician-hours on site. A quarterly maintenance visit is assumed at 0.5–1.0 technician-hours.
The labour side starts from a published figure, not a guess: the Bureau of Labor Statistics' OEWS survey (May 2025) gives a mean wage of $19.53 an hour for Pest Control Workers (SOC 37-2021) in the Houston metro. Nobody bills a customer at the raw wage — payroll taxes, benefits, the insurance the state requires, the truck, equipment, overhead and profit all sit on top of it — so the examples convert it with a declared 3.0× assumption: $19.53 × 3.0 = $58.59 per technician-hour.
- One-time treatment: 1–2 × $58.59, plus $3–$6 of chemical = $61.59–$123.18
- Quarterly visit: 0.5–1.0 × $58.59, plus about $3 of chemical = $32.30–$61.59
Run the same sums on the Texas statewide wage instead — $19.90 an hour from the same survey, slightly above Houston's for this occupation — and $59.70 per technician-hour produces $62.70–$125.40 and $32.85–$62.70. Two independent bases landing within about 2% of each other is the check; the published ranges round outward to $60–$125 and $30–$65, before tax.
The first-year figure is pure arithmetic on those two: the first visit at the one-time range, plus three quarterly visits — $60–$125 + 3 × $30–$65 = $150–$320 before tax. No first-visit premium and no plan discount is assumed; both are individual contract terms, and no source establishes a typical value for either. A steady-state year of four quarterly visits runs $120–$260 before tax on the same basis.
Check the licence before you check the price
Pest control licences in Texas are issued by the Texas Department of Agriculture's Structural Pest Control Service, under Occupations Code Chapter 1951 — per business, per location, and per category. The business licence fee is $300, a company may not operate or advertise before the licence issues, and the business must employ a certified commercial applicator at all times, with a named Responsible Certified Applicator for the location. Every licensed business carries at least $500,000 per-occurrence / $1,000,000 aggregate liability insurance, filed with the department — there is no bond alternative in this trade.
Run the check yourself, free:
-
1
Ask for the TPCL number — the business licence number. It must appear on termite disclosure documents by rule, and the company's contracts should carry the statement "Licensed and regulated by: Texas Department of Agriculture" with the department's address and phone.
-
2
Open the "Structural Pest Control Reports: Current Licenses" page on texasagriculture.gov and download the Commercial Business list.
-
3
Find the company by name or TPCL number. Not listed means no current business licence.
-
4
Read its row: the categories it holds (letter codes — P for Pest Control, T for Termite and Wood Destroying Insect Control, L for Lawn and Ornamental), the licence expiry date, the insurance expiry date, and the name of its Responsible Certified Applicator. All four should check out; the dates should be in the future.
TDA prints backup channels on the same page — pub.info@TexasAgriculture.gov, (800) 835-5832, and the Structural Pest Control Service at (866) 918-4481 — and the department publishes its final enforcement actions, so a company's history is as checkable as its licence.
Termites: compare the paperwork, not a price
This site publishes no termite treatment price, and the reason is Texas law itself. The rules define several lawful treatment types — full barriers, partial treatments, spot treatments (a limited area under 10 linear or square feet), and baiting systems — and require each proposal to state its own termiticide concentration or minimum number of bait stations. The right spec for a house is set after inspection, per property. Any single "termite treatment costs $X" figure would be invented, so instead, here is what the law puts in your hands.
Before any termite treatment begins, the business must give you a written estimate with disclosure documents, prepared by a certified applicator or licensed technician licensed in the termite category. Verbal estimates are allowed; a written one must be in your hands before treatment starts. The package must include:
- The business's name, address, phone number and TPCL number, and the estimate date
- A diagram of the structure with numerical perimeter measurements, areas of active or previous termite activity, the areas to be treated, conducive conditions and construction details
- A label for any pesticide recommended or used
- Complete warranty details, if any
- The concentration of termiticide to be used, or the minimum number of bait stations
- The Consumer Information Sheet and the TDA jurisdiction statement
- The signature of the termite-category applicator or technician
The disclosure must also spell out what partial, spot, baiting and barrier treatments mean, and carry the rule's own caution: treatment specifications and warranties vary widely, and the label provided is the minimum treatment specification. That is your comparison tool. Put two proposals side by side and compare diagram against diagram, concentration against concentration, warranty against warranty. A proposal missing the diagram, the label or the stated concentration is not a cheaper proposal — it is a company skipping what Texas law requires it to hand you. Keep the documents; the business must keep them for two years as well.
And check the category first: only a business holding the Termite and Wood Destroying Insect Control category may do this work. A general Pest Control licence does not cover it.
Buying or selling a home: the WDI report
For a real-estate transaction, the termite inspection is reported on a form the state prescribes: the Texas Official Wood Destroying Insect Report, form SPCS/T-5. The rules require that form for inspections connected with a home sale, permit no alterations or revisions to it, and allow supporting photos or graphs only as an addendum. A lender's own form (a VA form, for example) is supplemental — never a substitute.
Read the form for what it is. Its own scope section states it is not a structural damage report and not a warranty that wood-destroying insects are absent; it reports the visible presence or absence of termites and other wood-destroying insects, and conditions conducive to infestation, at the time of inspection. Copies go to the person who ordered the inspection and into the business's files, retained at least two years.
Texas prescribes the form but publishes no fee for the inspection, and no statute or department page sets one — fees are set by each business. So this page prints the form number, which you can verify on any report you are handed, and no price, which nobody can verify. If a report you are handed carries a different form number, ask why — SPCS/T-5 is the current prescribed form.
Found an active infestation? What to do first
- Write down what you are seeing, and where. Which rooms, which walls, when it started, whether it is getting worse. Photograph it. Identification drives treatment, and the applicator's first job is inspection and identification — your notes shorten that job.
- Leave the evidence in place until the inspection. Do not strip out damaged wood, mud tubes or dead insects before the company sees them; what looks like mess is the information the treatment spec is built from — and for termites, the disclosure diagram has to record areas of activity.
- Do not agree to treatment on the doorstep. For termites, a written estimate with the full disclosure package must come before treatment. For general pests, ask for the Consumer Information Sheet and a written statement of what will be applied, where, and at what price — with the tax treatment stated.
- Ask what product, and keep the answer. Every application is recorded with the product's name and EPA registration number. If a company cannot tell you what it intends to apply, that is your answer about the company.
- Check the licence and category before the appointment, not after — five minutes on the state's list, as set out above.
Factors that change the cost
- The perimeter, not just the floor area. The barrier is measured around the house. Our example assumes about 180 linear feet; a spread-out single storey has more treated band than a compact two-storey of the same floor area.
- Severity. The product label itself prices intensity in: its rates step from maintenance (0.2 fl oz per gallon) through clean-out (0.4) to severe infestations (0.8). A heavy clean-out is more time and more repeat work than a maintenance visit.
- Interior scope. A barrier-only maintenance visit is the small unit. Interior crack-and-crevice work across many rooms is what moves a visit toward the one-time range.
- One-time vs recurring. A single visit carries the full inspection and interior scope every time. The quarterly pattern splits it: one full visit, then smaller maintenance visits — which is why the first-year total ($150–$320) is not simply four times the one-time price.
- What is not in the general price. Termite work, rodent exclusion, bed bug work and mosquito service are different scopes with different products. A quote bundling them into a "general" figure is mixing units — ask for the lines separately.
- Tax. Structural pest control is taxable on the total charge, including any additional fees, even when no pests are found. Confirm whether a quote includes tax before comparing it with a pre-tax one.
Common mistakes
- Comparing a one-time price with a per-visit plan price. Different units. Convert both to a first-year total before deciding.
- Trusting a printed TPCL number without running it. Numbers can be copied, lapsed or belong to another location. The state's list is free and takes five minutes.
- Assuming "licensed" covers termites. It covers the categories listed on the licence — and termites are a separate category. Look for the T.
- Signing a termite proposal without the diagram and label. Both are required parts of the disclosure package. Their absence is a compliance failure, not a saving.
- Treating the WDI report as a warranty. The form itself says it is neither a damage report nor a warranty of absence.
Frequently asked questions
How much does pest control cost in Houston?
For a 2,000 sq ft, 3-bedroom, 2-bathroom home, our worked examples give $60–$125 for a one-time general treatment, $30–$65 per quarterly maintenance visit, and $150–$320 for the first year of quarterly service — all before sales tax. With tax at 8.25% inside city limits, those become $65–$135, $32–$70 and $162–$346. Nothing here is surveyed from companies: the ranges are built on this page from stated time assumptions, published wage data and a pesticide label's rates.
How do I check a Houston pest control company's licence?
Ask for its TPCL number, then download the Commercial Business list from the "Structural Pest Control Reports: Current Licenses" page on the Texas Department of Agriculture website. Find the company and check its categories, its licence expiry, its insurance expiry and its named Responsible Certified Applicator. The check is free and takes about five minutes.
Can a company licensed for general pest control treat my termites?
Only if it also holds the Termite and Wood Destroying Insect Control category. Licences are issued per category under Texas rules, and the Pest Control category covers pests that do not normally attack the building itself. Termite estimates and disclosures may only be prepared by applicators or technicians licensed in the termite category.
What paperwork must I get before a termite treatment?
A written estimate with disclosure documents: a diagram of the structure with perimeter measurements and treatment areas, the label of any pesticide to be used, warranty details, the termiticide concentration or minimum bait-station count, the Consumer Information Sheet, and the company's TPCL number — all before treatment begins. A verbal estimate alone is not enough to start work.
What is the SPCS/T-5 form?
The Texas Official Wood Destroying Insect Report — the form the state prescribes for termite inspections connected with a real-estate transaction. No alterations to it are permitted. It reports visible evidence and conducive conditions at inspection time; by its own terms it is not a structural damage report and not a warranty that insects are absent. Texas publishes no set fee for the inspection itself.
Is sales tax charged on pest control in Houston?
Yes. The Texas Comptroller's guidance for this trade states that structural pest control providers must collect sales tax on the total charge, including additional fees, even when no pests are found. Inside Houston city limits the combined rate is 8.25%, and the exact rate follows the service address. Ask whether any quote you receive includes tax.
How do I find out what was sprayed in my home?
Ask the company. Texas rules require records of every application — product names and EPA registration numbers, amounts, mixing rate, target pest, date, and the applicator's name and licence number — kept for two years. For an indoor treatment, the technician must also make the Department of Agriculture's Consumer Information Sheet available to you.
The pests are in my lawn, not my house. Is that the same licence?
No. Pests of trees, shrubs and plantings sit in a separate category, Lawn and Ornamental — and lawn pest work is covered on this site's lawn care pages, not here. A company treating your lawn needs that category, just as a termite company needs the termite category. The category on the licence has to match the job, whichever side of the foundation the job is on.
Areas served in and around Houston
Tell us your neighbourhood when you request a quote, and we will match you with a professional who covers your part of the city.
The list, once verified, describes the Houston area this page covers for matching a homeowner with a professional — a coverage area for this page, not a claim about any one company's service area.
Related pages
- Pest control services in Texas — the state hub, with the licence check and category rules explained for every city
- Pest control cost in Texas — the full cost guide: method, factors and first-year maths
- Home services in Houston, TX — all eight services in Houston
- Get a free quote
Disclaimer. The costs on this page are estimates only, computed from the sources below with their assumptions printed next to them. Your final price depends on your home, the job and the scope you agree, and costs vary by job, material and location. Always confirm a company's licence, its categories and its insurance before work starts.
Sources
- Texas Department of Agriculture, Structural Pest Control Service — business and applicator licensing; "Structural Pest Control Reports: Current Licenses"; the Official Texas Wood Destroying Insect Report, SPCS/T-5 (texasagriculture.gov)
- Texas Occupations Code Chapter 1951 — Structural Pest Control Act, §§1951.201, 1951.255, 1951.301 (statutes.capitol.texas.gov)
- Texas Administrative Code, Title 4 — §7.123 (insurance), §7.124 (licence categories), §7.144 (use records), §7.147 (consumer information sheet), §7.174 (termite disclosures), §7.176 (WDI report form)
- Texas Comptroller of Public Accounts — Publication 94-114, "Pest Control Services" (comptroller.texas.gov)
- Syngenta — Demand CS Insecticide label, EPA Reg. No. 100-1066 (label rates and perimeter band); retail listings at Pestrong and DoMyOwn, read November 17, 2026
- U.S. Bureau of Labor Statistics, OEWS May 2025 — Pest Control Workers (SOC 37-2021) wages, Houston metro and Texas (bls.gov; wage means read via republication of the OEWS file and cross-checked against the U.S. Department of Labor's republications — re-check at QA)