Plumber Cost in Texas: What Homeowners Actually Pay
Pinning down a plumber cost in Texas before you call anyone is harder than it should be: quotes for one job can land hundreds of dollars apart, and most cost pages never show where their numbers came from. This guide works in the open instead. Every range below is built from a named part or unit at a real retail or manufacturer price, plus labour hours costed from published wage data under one stated assumption. Check your job in the table, read the worked example to see the arithmetic, then decide your next step.
- Free quotes
- No obligation
- Licensed professionals
- Texas-focused
How much does a plumber cost in Texas?
There is no single plumber cost in Texas, so this guide prices five common jobs from named parts and published wage data instead: a garbage disposal swap runs $200–$295, a toilet replacement $520–$620, and a tank water heater replacement $870–$1,360 installed, each with its arithmetic shown below.
That spread is the honest answer: a one-part repair and a permitted appliance replacement are different jobs, and averaging them into one figure hides the only part that matters — what your job is made of. For the statewide picture — services, licensing, choosing — see the Texas plumbers hub.

Plumber costs by job
| Job | Cost | How the range is built |
|---|---|---|
| Water heater replacement, 40–50 gal tank, installed | $870–$1,360 | Two worked examples: a 40-gal electric unit at $569 retail plus 2–3 hours of labour, and the 50-gal gas example priced in full below ($859 unit, 2–4 hours). Houston permit included in both; expansion tank, drain pan and disposal of the old unit excluded |
| Garbage disposal replacement | $200–$295 | InSinkErator Badger 5XL 1/2 HP unit, $112 retail, plus 1–2 hours of labour. Power cord kit, a new sink flange and drain rework excluded |
| Toilet replacement, standard two-piece | $520–$620 | American Standard Cadet 3 FloWise unit, $388.56 retail, plus 1.5–2.5 hours of labour. Seat excluded — the listing does not state one is included; flange repair and haul-away excluded |
| Faucet replacement, bathroom or kitchen | $220–$430 | Delta Foundations faucets at manufacturer list prices — $133.30 bathroom, $244.10 kitchen pull-down — plus 1–2 hours of labour each. List prices are not street prices; a retailer's actual price may differ. New supply lines and in-wall valve work excluded |
| Water heater repair: one electric heating element | $210–$310 | Rheem PROTECH SP610160 OEM element, $77.79, plus 1.5–2.5 hours of labour. This row is that one repair only — not water heater repair in general. Generic elements sell for as little as $14.82, which would cut about $63 from these totals |
How to read the labour in every row. No row here quotes a market hourly rate, because we could not source one we can stand behind. Labour is built from wage data instead. The U.S. Bureau of Labor Statistics puts the Houston metro mean plumber's wage at $30.70 an hour (OEWS, May 2025) — a wage, not a billable rate, since it excludes payroll taxes, benefits, insurance, vehicles, overhead and margin. Our examples build the billable rate as wage × 3.0 = $92.10 an hour, cross-check every total on the Texas mean wage of $29.22 (× 3.0 = $87.66), and print that multiplier wherever totals appear. The hour bands are stated assumptions too: no authoritative install-time standard exists, so the band is the sensitivity.
Permit note for the fixture rows. The disposal, toilet and faucet ranges include no permit fee because Texas law does not require one for these swaps: the Texas Plumbing License Law (Occupations Code §1301.551(c)) carves replacement of lavatory or kitchen faucets, garbage disposals and water closets out of the municipal permit requirement, and Houston's Permitting Center lists faucet replacement among work that needs no permit. That covers like-for-like replacement on existing connections; new installations, relocations or re-piping are different work and do need a permit. The element row includes no permit fee and makes no permit claim; the water heater row already includes the Houston permit.
How the cost is calculated
Labour: time, built from a wage
Labour is hours × a billable rate, and both halves deserve scrutiny on any quote. The wage data anchors the rate: an employer pays the wage, but the business also carries insurance, a vehicle, tools and margin before an hour can be sold to you — the gap the declared 3.0 multiplier stands in for. The hours are set by the job: every table row assumes the fast case, a like-for-like swap on existing connections.
Parts and units: the name on the box sets the price
For replacements, the unit is often the largest single line: $112 for a standard 1/2 HP disposal, $388.56 for a two-piece toilet, $859 for a 50-gallon gas water heater. Price type matters — the faucet row uses manufacturer list prices, which sit above what many retailers charge; the other rows use retail prices seen on November 17, 2026. Part brand matters too: the OEM element in the repair row is $77.79, against $9.74–$14.82 for generic screw-in elements of the same rating. Know which one your quote is using.
Permits: a city fee, not a plumber's markup
Where a permit applies, the fee is the city's, set by a published schedule — not a markup. Houston requires a permit to replace or install a water heater, with an inspection afterwards; a master plumber registered with the city obtains it, no plan review is needed at a single-family home, and it stays valid for 180 days. The example below works its price line by line. Other Texas cities set their own schedules; this guide states a fee only for Houston, the one schedule verified.
Access: the hours you cannot see in a catalogue
Every row assumes the plumber can reach the work. A unit boxed into a tight space, pipework that must be cut back before the swap can start, or a flange that fails when the old toilet lifts — each adds time, and time is the labour line. Access is the main reason a quote given after inspection can honestly differ from a published standard-case range.
Timing: nights and weekends
Work booked ahead in normal hours is priced from ordinary labour; the same job at night or on a weekend usually costs more, because the labour is bought at unsocial hours. We put no figure on the difference: no official source publishes an emergency call-out fee or after-hours premium, and the Texas State Board of Plumbing Examiners (TSBPE) does not regulate what plumbers charge. Ask for the call-out charge before an out-of-hours visit, not after it.
Worked example: replacing a 50-gallon gas water heater
The job, with its assumptions stated: a like-for-like replacement of a standard tank water heater in a single-family Houston home — same location and connections, no re-piping, venting changes or code-upgrade work. The unit is a Rheem Performance, 50 gallons, tall, natural gas, 38,000 BTU (model XG50T06EN38U1), sized by the maker for households of three to five, with a six-year tank and parts warranty; its retail price, seen November 17, 2026, is $859. Houston is the setting because its official permit schedule is the one this guide verified.
| Line | Amount | Basis |
|---|---|---|
| Unit | $859 | Retail price for that model, seen November 17, 2026 — retail prices change |
| Permit | $131.12 | City of Houston components, worked below |
| Labour | $184.20–$368.40 | 2–4 hours (stated assumption for a like-for-like tank swap) at $92.10 an hour — the Houston wage of $30.70 × the declared 3.0 assumption |
| Total | $1,160–$1,360 | Rounded from the two computations below |
The permit arithmetic: Houston's 2026 schedule charges a $34.24 fixture fee for the first one to three fixtures, a plumbing minimum of $97.56, and a $33.56 administration fee per permit. The minimum is the larger figure, so it governs: $97.56 + $33.56 = $131.12. One disclosure — the city's own documents disagree: a city instrument's body text shows a $91.05 minimum and the general schedule $91.06. On that lower basis the permit would be $124.61.
Computed two independent ways, the totals agree. Method 1 (Houston wage, primary permit basis): labour at two, three and four hours gives $184.20, $276.30 and $368.40; totals run $1,174.32–$1,358.52, midpoint $1,266.42. Method 2 (Texas wage × 3.0 = $87.66 an hour, alternate permit basis $124.61): labour runs $175.32–$350.64; totals run $1,158.93–$1,334.25, midpoint $1,246.59. The ranges overlap almost entirely; the midpoints sit $19.83 apart, about 1.6%. Rounded, that is the published $1,160–$1,360 — and the top of the table's water-heater row.
Not in this total: a drain pan, an expansion tank, disposal of the old unit, and fittings — each left out because we hold no verified price for it, not because your job will never need one. The expansion tank is not a blanket requirement either: model codes (IPC 607.3; UPC 608.3) require a thermal expansion device only where a check valve, pressure-reducing valve or backflow preventer makes the system a closed one.
What changes the price
- A bigger or different unit. Capacity, fuel type and warranty length move the unit line directly; the two water heater examples on this site differ by $290 on the unit alone ($569 electric against $859 gas).
- Work beyond a like-for-like swap. Relocating the unit, re-piping, venting changes or code upgrades all sit outside the table's assumptions and add parts and hours.
- A closed water system. If your home's supply arrangement makes an expansion device necessary under the conditional rule above, that is an extra part and extra time on top of a water heater swap.
- Your city. Only Houston's permit fee is stated here. Another Texas city sets its own schedule, so the permit line — and the total — moves with it.
- The part you choose. OEM against generic made a $63 difference on a single heating element; on larger jobs the same choice moves more.
What this guide does not price — and why
Some jobs carry no range here, deliberately. Drain cleaning has no dominant part to anchor a total: the charge is labour plus equipment, the time turns on where the blockage sits, the length of run and cleanout access, and no authoritative source bounds it — the only published figures are aggregator ranges, which this guide does not use as a basis. Multi-part water heater repairs — thermostats, temperature-and-pressure valves, gas valves, thermocouples — depend on a diagnosis before anyone knows which parts have failed, and we hold no verified parts basket for them; only the single-element repair is priced. Call-out fees and bathroom rough-in work are unpriced for the same reason: no grounded basis we can show you.
Until those jobs can be built from sources, judge a quote on its structure. A quote you can judge names the parts and their models, states the labour basis, shows the permit line or explains why none applies, and lists its exclusions. Check the company's Responsible Master Plumber number against the official licence search in the questions below. A single lump figure with none of that behind it is not a bargain or a rip-off — it is unauditable, and you can ask for the breakdown before you agree.
Mistakes that make plumbing cost more
- Comparing totals instead of scope. Two quotes for "a new water heater" can differ on the permit, the expansion device, disposal and the warranty. Line them up item by item before deciding one is cheaper.
- Accepting a firm price given without a look at the job. The table's ranges assume standard access and connections. A price promised sight-unseen gets revised when the real conditions show themselves — usually in one direction.
- Paying for a blanket expansion tank without the condition being checked. The requirement is conditional on a closed system. Ask which device on your supply makes yours closed; if none does, ask what the charge is for.
- Letting a quote hide the parts choice. OEM and generic, list and street — the spread on one small part was $63. Ask for the part name and model on the quote.
- Skipping the permit on a water heater swap to save the fee. In Houston the permit and inspection are required, and the inspection is your independent proof the work was done to code.
Plumber cost questions
How much does a plumber charge per hour in Texas?
No official or surveyed billable rate exists that we could verify, so this guide states none. What is published is wage data: the Bureau of Labor Statistics puts the Texas mean plumber's wage at $29.22 an hour, the median at $28.77 (OEWS, May 2025). Our examples build a billable rate from the wage with a declared 3.0 multiplier — $87.66 statewide, $92.10 on Houston wages — an assumption, never a market quote.
How much does it cost to replace a water heater in Texas?
On the evidence verified here, $870–$1,360 installed for a standard 40- to 50-gallon tank — the low end a 40-gallon electric swap, the high end the 50-gallon gas example worked in full above. Both include the Houston permit and exclude a drain pan, an expansion tank and disposal, so a quote including those extras is not comparable until the scopes match.
Do I need a permit for plumbing work in Texas, and does it add to the cost?
In Houston, replacing or installing a water heater requires one: $131.12 on the city's plumbing minimum, or $124.61 on the lower minimum in another city document, obtained by a master plumber registered with the city. Like-for-like fixture swaps are different: state law (Occupations Code §1301.551(c)) exempts replacement of faucets, garbage disposals and water closets from the permit requirement, so the fixture ranges in the table carry no permit fee. Other Texas cities set their own rules.
Do I need an expansion tank when I replace my water heater?
Only if your system is a closed one. Model codes (IPC 607.3; UPC 608.3) require a thermal expansion device where the heater's supply passes through a check valve, pressure-reducing valve or backflow preventer. No Houston source we found makes the tank unconditional — treat a claim that every replacement needs one as a prompt to ask which device closes your system.
How do I check that a Texas plumber is licensed?
Ask the company for its Responsible Master Plumber (RMP) number — every Texas plumbing company must operate under one. Open the TSBPE Public License Search, search by license number, set the board to the Texas State Board of Plumbing Examiners, enter the numerals only (no rank letter), and open the record: licence status and expiry, insurance status, endorsements and disciplinary actions, synced with the board's database.
Why do quotes for the same job differ so much, and how do I compare them?
Because the totals are built from different ingredients: OEM against generic parts, list against street prices, a permit included against one left out, disposal charged against excluded. Force the same structure onto each quote — part named, labour basis stated, permit line shown, exclusions listed — then judge the totals. The worked example above is one honest build to set them against.
Find plumbers in your city
You have the ranges and the method; the next step is a person. Start from Texas plumbers, their services and how licensing works, or go straight to your city — Houston plumbers and the permit rules that shape their prices, what Dallas homeowners pay for plumbing, plumbers in Fort Worth, Austin plumbing services, San Antonio plumbers near you, El Paso plumbers and prices. Ready for your own number? Get a free plumbing quote — or see what HVAC replacement costs in Texas.
Disclaimer. The costs on this page are estimates only, computed from the sources below with their assumptions printed next to them. Your final price depends on your home, the job and the scope you agree, and costs vary by job, material and location. Always confirm a plumber's licence and insurance before work starts.
Sources
- U.S. Bureau of Labor Statistics, OEWS May 2025 — plumber wages, Houston metro and Texas (bls.gov; Texas figures via the U.S. Department of Labor's O*NET/CareerOneStop republication of BLS OEWS)
- City of Houston, Houston Permitting Center — water heater permit requirements; 2026 Permit Fee Schedule (houstonpermittingcenter.org)
- Texas State Board of Plumbing Examiners — licence types; Responsible Master Plumber; How to use the Public License Search (tsbpe.texas.gov)
- The Home Depot — Rheem Performance 50 gal natural gas water heater, model XG50T06EN38U1, and American Standard Cadet 3 FloWise toilet, retail prices seen November 17, 2026
- Lowe's — InSinkErator Badger 5XL 1/2 HP garbage disposal, retail price seen November 17, 2026
- Delta Faucet Company — Foundations bathroom faucet B510LF-PPU-ECO2 and kitchen faucet 19904LF, manufacturer list prices seen November 17, 2026
- Opentip — Rheem PROTECH SP610160 heating element listing; PlumbingSupply.com — generic screw-in heating elements; prices seen November 17, 2026
- International Code Council / IAPMO model codes — IPC 607.3 / UPC 608.3, thermal expansion control
