Plumbers in Houston, TX

Licensed Texas plumbers for leaks, drains and water heaters — and one benchmark job, a standard tank water heater replacement, runs $870–$1,360 installed in the worked examples below.

A failed water heater, a blocked drain, a leak soaking a floor — plumbers in Houston, TX handle that work in homes across the city, from first repairs to full replacements. This page gives you one common job priced with the maths shown, the first steps to take in an emergency, and the licence check that tells you whether the person at your door is legal to hire.

How much does a plumber cost in Houston?

Plumbers in Houston, TX repair leaks, clear drains, and replace water heaters in homes across the city. One benchmark job, replacing a 40- to 50-gallon tank water heater, costs $870–$1,360 installed in the worked examples on this page. Your price depends on the job, access, and parts — check the licence, then call or request a quote.

JobInstalled cost
Water heater replacement, 40–50 gal tank$870–$1,360

That row is the only cost range here, because it is the only one built from checked sources: a real unit price, the City of Houston permit schedule, and published wage data. Repair visits, drain work and bathroom work carry no figure, because none could be verified from primary sources. Job-by-job detail sits in the full Texas plumber cost guide.

  • Free quotes
  • No obligation
  • Licensed professionals
  • Texas-focused
Plumber repairing pipes under a kitchen sink

Emergency plumber in Houston: what to do first

If a pipe bursts, act before you shop around. The City of Houston's own guidance is short:

  1. 1

    Shut off your water at the main valve.

  2. 2

    Open faucets to drain the remaining water from the pipes.

  3. 3

    Contact a licensed plumber for the repair.

  4. 4

    If you cannot find your main shutoff valve, call 311 for help locating it.

Keep water away from electrical outlets, and when you call, say where the water is coming from and whether the main valve is off. Emergency work outside normal hours usually costs more than the same repair booked ahead, because you are paying for labour at unsocial hours. We publish no call-out fee or after-hours premium: no official source sets one, and the Texas plumbing board does not regulate prices; we could not verify a figure for either from primary sources. Ask for both figures before you agree to the visit.

What a Houston plumber does — and what is included

Repairs: leaks, bursts and running toilets

A repair visit starts with finding the true source, which is not always where the water shows. The plumber isolates the affected line, inspects the pipe or fitting, and replaces the failed section or part. You are paying for the diagnosis as much as the fix.

Water heaters: repair or replace

The plumber checks the elements or burner, thermostat and safety valves before anyone talks about replacement. Replacement means draining and removing the old tank, setting the new unit, connecting water and power or gas, and — in Houston — working under a permit with an inspection. If the tank itself is leaking, repair money is wasted: a leaking tank cannot be patched.

Drains and sewers

A blocked drain is cleared at the nearest access point first, with a cable or jet. If blocks keep returning in the same place, expect a camera inspection: it shows whether the cause is build-up, a sagging section, or something in the pipe that should not be there.

Worked example: a Houston water heater job, priced step by step

The job, with its assumptions stated: a 3-bedroom single-family Houston home, water heater in an interior closet, failed tank out and a like-for-like unit in. The unit is a Rheem Performance Plus, 40 gallons, tall, electric, dual 4,500-watt elements (model XE40T09EL45U1, 9-year warranty, sized by the maker for households of 2–4).

LineAmountBasis
Unit$569Retail price for that model, seen November 17, 2026 — retail prices change
Labour$184.20–$276.302–3 hours (stated assumption for an electric like-for-like swap, no re-piping) at a billable rate built as wage × 3.0 — see below
Permit$131.12City of Houston components, explained below
Total$870–$975Cleared range; recomputed on Texas statewide wages and the alternate permit basis, the same example gives $869–$957 — the two methods overlap

The labour rate needs its assumption in the open. The U.S. Bureau of Labor Statistics puts the mean wage for plumbers in the Houston metro at $30.70 an hour (OEWS, May 2025). A wage is not a billable rate: it excludes payroll taxes, insurance, vehicle, overhead and margin. We build the rate as $30.70 × 3.0 = $92.10 an hour. That multiplier is our stated assumption, not a market quote — no verified Houston billable rate exists.

The permit line needs its workings shown too. Houston charges a $34.24 fixture fee for the first 1–3 fixtures, a plumbing minimum fee of $97.56, and a $33.56 administration fee per permit. The minimum beats the fixture fee, so the permit is $97.56 + $33.56 = $131.12. One disclosure: the city's own documents differ on that minimum — one city document's body text shows $91.05 and its general schedule $91.06, against the plumbing schedule's $97.56. On the lower figure the permit would be $124.61, and the total above would drop by $6.51.

Not in this total: a drain pan (a sensible extra for an interior closet, excluded because we hold no verified price for one), an expansion tank, disposal of the old unit, and fittings. An expansion tank is not a blanket Houston requirement: model plumbing codes require a thermal expansion device only where a check valve, pressure-reducing valve or backflow preventer makes your system a closed one.

What changes the cost in Houston

Access and where the unit sits

The same water heater costs more to swap in a tight interior closet than in an open garage, because every step is slower and the old tank is harder to get out. If a plumber must move, cut or re-route before the real job starts, those hours are in your price.

Age of the home and pipe material

On older homes, the fitting in the wall often does not match the new fixture or unit. Adapters, a short section of new pipe, or a valve that would not survive being disturbed add parts and time — none of it visible until the old work is exposed. A firm price before inspection is a warning sign, not a bargain.

Permits and inspections in Houston

Houston requires a permit to replace or install a water heater, and an inspection afterwards. The permit is obtained by a master plumber registered with the City of Houston — not by you — and at a single-family home no plan review is needed. It stays valid for 180 days. If a water heater quote has no permit line, ask why.

Timing: nights, weekends and busy spells

A repair booked for Tuesday morning is priced from ordinary labour. The same repair at night or on a weekend carries the out-of-hours premium explained above — real, but set by each company, with no published rate we can verify and pass on.

Mistakes Houston homeowners make when hiring a plumber

  • Hiring on a phone quote with no inspection. The price was guessed before anyone saw the pipe. It will be re-guessed, upwards, in your hallway.
  • Not asking for the RMP number. Every Texas plumbing company works under a Responsible Master Plumber. If a company cannot give you that number, stop there.
  • Paying in full before the inspection sign-off. Where a permit applies, the city's inspection is your proof the work was done to code. Keep the final payment until it passes.
  • Living with a slow leak. A drip you can hear is water inside a wall or under a floor the whole time. The repair grows; the leak does not shrink.

How to choose a plumber in Texas

Check the licence: the TSBPE lookup, step by step

Texas plumbers are licensed by the Texas State Board of Plumbing Examiners (TSBPE). Ask the company for its Responsible Master Plumber (RMP) number, then check it yourself:

1. Go to the TSBPE website and open the Public License Search ("Find a license/registration").

2. Choose how to search — by license number if you have the RMP number, the surest way, or by name.

3. Set the board to the Texas State Board of Plumbing Examiners and select "Plumbing – Licensed or Registered".

4. By number, type the numerals only — leave out the rank letter — confirm the not-a-robot check, and click Search.

5. Click the plumber's name in the results to open the licence record.

6. Read the record: licence status (current or expired), expiration date, certificate-of-insurance status and its expiration, endorsements, continuing-education history, disciplinary actions, fingerprint status. The data is synced in real time with the board's database.

One RMP serves one company at a time, and that RMP's duties benefit you directly: obtaining permits, requesting inspections, and making sure everyone on your job holds a current licence or registration.

Confirm insurance and what it covers

The RMP must show proof of at least $300,000 in commercial liability insurance to hold that designation. Do not take a verbal "we're insured": the licence record shows the insurance status and expiry date, and you can ask to see the certificate before work starts.

Questions to ask before work starts

  • What is the RMP number, and whose name is on the licence?
  • Is the price a written quote, and what exactly does it exclude?
  • Who pulls the permit, and is the permit fee in the quote?
  • What guarantee covers the work, and for how long?
  • If you find more damage once things are open, how is extra work agreed before it is done?

For the statewide picture, see all plumbers in Texas, and for other trades in this city, home services in Houston, TX.

Houston plumbing questions

How much does a plumber cost in Houston?

There is no single Houston average we can stand behind, so we publish a benchmark: replacing a 40- to 50-gallon tank water heater, installed and permitted, runs $870–$1,360 in the worked examples here and in the cost guide. Your price turns on the work, access, parts and timing.

What should I do first if a pipe bursts in my Houston home?

Follow the City of Houston's steps: shut off your water at the main valve, open faucets to drain the remaining water, and contact a licensed plumber. If you need help finding your main shutoff valve, call 311.

Do I need an expansion tank when I replace my water heater?

Only in one situation. Model plumbing codes (IPC 607.3, and the UPC equivalent) require a thermal expansion device where the heater's supply passes through a check valve, pressure-reducing valve or backflow preventer — where your system is closed. No Houston source we found makes it unconditional.

How do I check whether a Houston plumber is licensed in Texas?

Ask for the company's Responsible Master Plumber number, then run the TSBPE Public License Search: search by license number, set the board to the Texas State Board of Plumbing Examiners, enter the numerals only, and open the record. Check the status is current, and read the insurance status and any disciplinary actions.

Do plumbers in Houston charge more for emergency or after-hours calls?

Usually, yes — the reason is labour timing, not the repair itself. What we cannot give you is a figure: no official source publishes a Houston call-out fee or after-hours premium, and the Texas plumbing board does not regulate prices. Ask the call-out charge before booking.

Does Houston require a permit to replace a water heater?

Yes. Houston requires a permit to replace or install a water heater, and an inspection once the work is done; at a single-family home, no plan review is required. The permit is obtained by a master plumber registered with the City of Houston and stays valid for 180 days.

How long does a typical plumbing repair take?

It depends on what has failed, how hard it is to reach, and whether parts are on the van or must be fetched. We give no standard duration, because none is published by an authoritative source; get the estimate from the plumber who has seen your job, in writing.

What questions should I ask before hiring a plumber in Houston?

Start with the licence: ask for the RMP number and check it on the TSBPE search yourself. Then ask whether the quote is written and what it excludes, who pulls the permit and whether its fee is included, and what guarantee covers the work.

Areas served in and around Houston

Tell us your neighbourhood when you request a quote, and we will match you with a professional who covers your part of the city.

The list, once verified, describes the Houston area this page covers for matching a homeowner with a professional — a coverage area for this page, not a claim about any one company's service area.

Related services and other Texas cities

Disclaimer. The costs on this page are estimates only, computed from the sources below with their assumptions printed next to them. Your final price depends on your home, the job and the scope you agree, and costs vary by job, material and location. Always confirm a plumber's licence and insurance before work starts.

Sources

  • Texas State Board of Plumbing Examiners — licence types; Responsible Master Plumber; How to use the Public License Search (tsbpe.texas.gov)
  • City of Houston, Houston Permitting Center — water heater permit requirements; 2026 Permit Fee Schedule (houstonpermittingcenter.org)
  • City of Houston — burst-pipe first steps and 311 guidance (houstontx.gov)
  • U.S. Bureau of Labor Statistics, OEWS May 2025 — plumber wages, Houston metro (bls.gov)
  • The Home Depot — Rheem Performance Plus 40 gal electric water heater, model XE40T09EL45U1, retail price seen November 17, 2026
  • International Code Council / IAPMO model codes — IPC 607.3 / UPC 608.3, thermal expansion control
Call for a free quote Get a Quote