Pest Control in Fort Worth, TX

For the Fort Worth home used throughout this page — 2,000 sq ft, 3 bedrooms, 2 bathrooms, one storey on a slab — a one-time general pest treatment computes to $65–$130 before sales tax, or $70–$141 with Fort Worth's 8.25% applied. A quarterly maintenance visit computes to $35–$65 before tax. One disclosure belongs at the front: those ranges are identical to the Dallas page's, because the federal wage data underneath them is published for the combined Dallas-Fort Worth metro and no Fort Worth-only wage exists. This page uses the shared basis openly rather than dressing the same number up as a Fort Worth finding — and it differs from Dallas where the cities genuinely differ: the tax stack, and the county's own mosquito surveillance, which a Fort Worth homeowner can read free.

Pest control in Fort Worth is licensed by the Texas Department of Agriculture, in categories that decide what a company may treat. So the Fort Worth homeowner's task is twofold: arrive at a price that can be checked, and confirm the company quoting holds the category for the job. This page does both, then walks through the two pieces of Texas paperwork — the termite disclosure package and the official wood-destroying insect report — that protect you on the bigger jobs.

Pest control costs in Fort Worth at a glance

One house stands behind every figure in the box: 2,000 sq ft, 3 bedrooms, 2 bathrooms, single storey on a slab, general pests only. Every figure is before sales tax — structural pest control is taxable in Texas, so the tax appears in its own column rather than folded silently into the range. The with-tax column uses the 8.25% combined rate for an address inside Fort Worth city limits; the rate follows the service address, so yours may differ.

ServiceBefore taxWith tax at 8.25%
One-time general treatment$65–$130$70–$141
Quarterly maintenance visit$35–$65 per visit$38–$70 per visit
First year of quarterly service (first visit + 3 maintenance visits)$170–$325$184–$352

Not priced in this table: termite treatment, the wood-destroying insect inspection used in home sales, mosquito service, rodent exclusion and bed bug work. No verified price basis exists for any of them, so none receives a number here. The termite and inspection sections below explain what Texas law gives you instead of a number.

  • Free quotes
  • No obligation
  • Licensed professionals
  • Texas-focused
Pest control technician treating the exterior foundation of a home

The scope these prices assume

A general treatment falls within the Pest Control category of the state licence: pests in and around the home that attack its contents or furnishings or amount to a general nuisance — cockroaches, ants, spiders, silverfish, crickets and the like — but not pests that attack the building itself.

The visit priced here runs in three parts. Inspection and identification first: the certified applicator is the person answerable for inspection and identification, and treatment is selected from what is actually found. Interior work where the activity is — crack-and-crevice application in the rooms and voids the label allows. An exterior barrier around the foundation, applied at the rate and band width the product's EPA label directs.

Two paperwork points belong to the visit itself. For an indoor treatment at a private residence that is not a rental, the applicator or technician must make the Department of Agriculture's Consumer Information Sheet available to you — the department's own sheet, not the company's version. And whatever is applied is entered in the company's use records — product name, EPA registration number, amount, mixing rate, target pest, date — and kept for two years. You can ask what was sprayed, and a record exists that answers.

The worked example, in full

Start with the chemical, because it is the part people assume drives the price — and it does not.

The example prices one lawful, labelled way of doing the job, using a professional concentrate in routine structural use: Demand CS (Syngenta; EPA Reg. No. 100-1066). Its label sets the rates: 0.2 fl oz per gallon of water for maintenance, 0.4 for clean-out, 0.8 for severe infestations, and for a perimeter barrier, application in a band up to 7 feet wide around the structure and up to 2 feet up the foundation. Our home's perimeter is about 180 linear feet (a roughly 40 × 50 ft footprint — a declared assumption), so the treated band is about 1,620 sq ft. At the label's clean-out rate that is roughly 0.65 fl oz of concentrate for the barrier; interior crack-and-crevice work uses a fraction of a gallon of finished spray. Declared total: 0.5–1.0 fl oz of concentrate per visit. The concentrate retailed at $43.95 for 8 fl oz and $167.95 for 32 fl oz on November 17, 2026 — $5.25–$5.49 per fl oz. The chemical line of a visit is about $3–$6. A general pest visit is priced by the technician's time and the truck roll, not by the chemical.

Time is the second input, and it is an assumption, declared as one: no regulator or statistics agency publishes treatment times. A one-time treatment — inspection, interior work, exterior barrier — is assumed to take 1–2 technician-hours on site. A quarterly maintenance visit is assumed at 0.5–1.0 technician-hours.

The labour side starts from a published figure, not a guess: the Bureau of Labor Statistics' OEWS survey (May 2025) gives a mean wage of $20.46 an hour for Pest Control Workers (SOC 37-2021) — for the Dallas-Fort Worth-Arlington metro as a whole. Read that again before using the numbers: the survey publishes one combined metro wage, and there is no Fort Worth-only figure. These examples therefore stand on the same labour basis as the Dallas page's, and the ranges come out the same. A page claiming a distinct Fort Worth rate would be inventing it. Nobody bills a customer at the raw wage — payroll taxes, benefits, the insurance the state requires, the truck, equipment, overhead and profit all sit on top of it — so the examples convert it with a declared 3.0× assumption: $20.46 × 3.0 = $61.38 per technician-hour.

  • One-time treatment: 1–2 × $61.38, plus $3–$6 of chemical = $64.38–$128.76
  • Quarterly visit: 0.5–1.0 × $61.38, plus about $3 of chemical = $33.69–$64.38

Run the same sums on the Texas statewide wage instead — $19.90 an hour from the same survey — and $59.70 per technician-hour produces $62.70–$125.40 and $32.85–$62.70. Two independent bases landing within about 3% of each other is the check; the published ranges round outward to $65–$130 and $35–$65, before tax.

The first-year figure is pure arithmetic on those two: the first visit at the one-time range, plus three quarterly visits — $65–$130 + 3 × $35–$65 = $170–$325 before tax. No first-visit premium and no plan discount is assumed; both are individual contract terms, and no source establishes a typical value for either. A steady-state year of four quarterly visits runs $140–$260 before tax on the same basis.

Before you pay for mosquito work, read the county's report

Fort Worth sits inside a county that publishes its own mosquito intelligence. Tarrant County Public Health's Vector Control operation runs mosquito and West Nile virus surveillance across the county — a network of trap types collecting samples year-round — and tests mosquito pools at the North Texas Regional Laboratory. The results come out as a Weekly Arbovirus Surveillance Report: pools tested, West Nile positives, trap counts. The same office maintains a ground-spraying page where residents can check whether spraying is planned near them, and it holds nuisance-abatement powers under the Texas Health and Safety Code, including treating abandoned properties.

The practical consequence for a Fort Worth homeowner: before paying anyone for mosquito work, you can read the county's own weekly account of local West Nile activity — free, published by the county health department, and specific to Tarrant County in a way no company's marketing is. If the county's traps are finding little, that is context for any quote you are handed; if activity is spiking near you, that is context too.

Hold the boundary clearly, though. County surveillance tells you what is happening and handles public breeding sources and abandoned properties. It is not a treatment service for your home or yard, and it does not replace a licensed company's work around your own foundation. The report informs the decision; the paid visit does the treating.

Check the licence before you check the price

Pest control licences in Texas are issued by the Texas Department of Agriculture's Structural Pest Control Service, under Occupations Code Chapter 1951 — per business, per location, and per category. The business licence fee is $300, a company may not operate or advertise before the licence issues, and the business must employ a certified commercial applicator at all times, with a named Responsible Certified Applicator for the location. Every licensed business carries at least $500,000 per-occurrence / $1,000,000 aggregate liability insurance, filed with the department — there is no bond alternative in this trade.

Run the check yourself, free:

1. Ask for the TPCL number — the business licence number. It must appear on termite disclosure documents by rule, and the company's contracts should carry the statement "Licensed and regulated by: Texas Department of Agriculture" with the department's address and phone. 2. Open the "Structural Pest Control Reports: Current Licenses" page on texasagriculture.gov and download the Commercial Business list. 3. Find the company by name or TPCL number. Not listed means no current business licence. 4. Read its row: the categories it holds (letter codes — P for Pest Control, T for Termite and Wood Destroying Insect Control, L for Lawn and Ornamental), the licence expiry date, the insurance expiry date, and the name of its Responsible Certified Applicator. All four should check out; the dates should be in the future.

TDA prints backup channels on the same page — pub.info@TexasAgriculture.gov, (800) 835-5832, and the Structural Pest Control Service at (866) 918-4481 — and the department publishes its final enforcement actions, so a company's history is as checkable as its licence.

Termites: compare the paperwork, not a price

This site publishes no termite treatment price, and the reason is Texas law itself. The rules define several lawful treatment types — full barriers, partial treatments, spot treatments (a limited area under 10 linear or square feet), and baiting systems — and require each proposal to state its own termiticide concentration or minimum number of bait stations. The right spec for a house is set after inspection, per property. Any single "termite treatment costs $X" figure would be invented, so instead, here is what the law puts in your hands.

Before any termite treatment begins, the business must give you a written estimate with disclosure documents, prepared by a certified applicator or licensed technician licensed in the termite category. Verbal estimates are allowed; a written one must be in your hands before treatment starts. The package must include:

  • The business's name, address, phone number and TPCL number, and the estimate date
  • A diagram of the structure with numerical perimeter measurements, areas of active or previous termite activity, the areas to be treated, conducive conditions and construction details
  • A label for any pesticide recommended or used
  • Complete warranty details, if any
  • The concentration of termiticide to be used, or the minimum number of bait stations
  • The Consumer Information Sheet and the TDA jurisdiction statement
  • The signature of the termite-category applicator or technician

The disclosure must also spell out what partial, spot, baiting and barrier treatments mean, and carry the rule's own caution: treatment specifications and warranties vary widely, and the label provided is the minimum treatment specification. That is your comparison tool. Put two proposals side by side and compare diagram against diagram, concentration against concentration, warranty against warranty. A proposal missing the diagram, the label or the stated concentration is not a cheaper proposal — it is a company skipping what Texas law requires it to hand you. Keep the documents; the business must keep them for two years as well.

And check the category first: only a business holding the Termite and Wood Destroying Insect Control category may do this work. A general Pest Control licence does not cover it.

Buying or selling a home: the WDI report

For a real-estate transaction, the termite inspection is reported on a form the state prescribes: the Texas Official Wood Destroying Insect Report, form SPCS/T-5. The rules require that form for inspections connected with a home sale, permit no alterations or revisions to it, and allow supporting photos or graphs only as an addendum. A lender's own form (a VA form, for example) is supplemental — never a substitute.

Read the form for what it is. Its own scope section states it is not a structural damage report and not a warranty that wood-destroying insects are absent; it reports the visible presence or absence of termites and other wood-destroying insects, and conditions conducive to infestation, at the time of inspection. Copies go to the person who ordered the inspection and into the business's files, retained at least two years.

Texas prescribes the form but publishes no fee for the inspection, and no statute or department page sets one — fees are set by each business. So this page prints the form number, which you can verify on any report you are handed, and no price, which nobody can verify. If a report you are handed carries a different form number, ask why — SPCS/T-5 is the current prescribed form.

The tax on a Fort Worth pest control bill

Structural pest control is taxable in Texas on the total charge — additional fees included, and even on a visit that finds no pests. For an address inside Fort Worth city limits the combined rate is 8.25%, but Fort Worth reaches that total by a different route from Dallas: 6.25% state tax, 1.00% City of Fort Worth, then two half-percent districts — 0.50% to the Fort Worth MTA (Trinity Metro) and 0.50% to the Fort Worth Crime Control district. Tarrant County levies no county sales tax.

The composition matters more than the total: a correct Fort Worth invoice's tax line is built from those jurisdictions. And the rate follows the address being serviced, not the company's office, so a home outside the city limits or inside a special-purpose district can carry a different total — the Comptroller's Sales Tax Rate Locator gives the exact rate for a specific address. Finally, a quote showing no tax line is not automatically cheaper: the company owes the tax either way, so ask whether the figure in front of you already includes it.

Found an active infestation? What to do first

  • Write down what you are seeing, and where. Which rooms, which walls, when it started, whether it is getting worse. Photograph it. Identification drives treatment, and the applicator's first job is inspection and identification — your notes shorten that job.
  • Leave the evidence in place until the inspection. Do not strip out damaged wood, mud tubes or dead insects before the company sees them; what looks like mess is the information the treatment spec is built from — and for termites, the disclosure diagram has to record areas of activity.
  • Do not agree to treatment on the doorstep. For termites, a written estimate with the full disclosure package must come before treatment. For general pests, ask for the Consumer Information Sheet and a written statement of what will be applied, where, and at what price — with the tax treatment stated.
  • Ask what product, and keep the answer. Every application is recorded with the product's name and EPA registration number. If a company cannot tell you what it intends to apply, that is your answer about the company.
  • Check the licence and category before the appointment, not after — five minutes on the state's list, as set out above.

Factors that change the cost

  • The perimeter, not just the floor area. The barrier is measured around the house. Our example assumes about 180 linear feet; a spread-out single storey has more treated band than a compact two-storey of the same floor area.
  • Severity. The product label itself prices intensity in: its rates step from maintenance (0.2 fl oz per gallon) through clean-out (0.4) to severe infestations (0.8). A heavy clean-out is more time and more repeat work than a maintenance visit.
  • Interior scope. A barrier-only maintenance visit is the small unit. Interior crack-and-crevice work across many rooms is what moves a visit toward the one-time range.
  • One-time vs recurring. A single visit carries the full inspection and interior scope every time. The quarterly pattern splits it: one full visit, then smaller maintenance visits — which is why the first-year total ($170–$325) is not simply four times the one-time price.
  • What is not in the general price. Termite work, rodent exclusion, bed bug work and mosquito service are different scopes with different products. A quote bundling them into a "general" figure is mixing units — ask for the lines separately.
  • Tax. Structural pest control is taxable on the total charge, including any additional fees, even when no pests are found. Confirm whether a quote includes tax before comparing it with a pre-tax one.

Common mistakes

  • Comparing a one-time price with a per-visit plan price. Different units. Convert both to a first-year total before deciding.
  • Trusting a printed TPCL number without running it. Numbers can be copied, lapsed or belong to another location. The state's list is free and takes five minutes.
  • Assuming "licensed" covers termites. It covers the categories listed on the licence — and termites are a separate category. Look for the T.
  • Signing a termite proposal without the diagram and label. Both are required parts of the disclosure package. Their absence is a compliance failure, not a saving.
  • Treating the WDI report as a warranty. The form itself says it is neither a damage report nor a warranty of absence.
  • Paying for mosquito urgency before checking the county's numbers. Tarrant County publishes a weekly surveillance report free; read it before deciding how much mosquito work your street actually needs.

Frequently asked questions

How much does pest control cost in Fort Worth?

For a 2,000 sq ft, 3-bedroom, 2-bathroom home, our worked examples give $65–$130 for a one-time general treatment, $35–$65 per quarterly maintenance visit, and $170–$325 for the first year of quarterly service — all before sales tax. With tax at 8.25% inside city limits, those become $70–$141, $38–$70 and $184–$352. Nothing here is surveyed from companies: the ranges are built on this page from stated time assumptions, published wage data and a pesticide label's rates.

Why are Fort Worth's prices the same as Dallas's?

Because the wage underneath them is the same. The Bureau of Labor Statistics publishes one mean wage for pest control workers across the combined Dallas-Fort Worth-Arlington metro — $20.46 an hour — and no Fort Worth-only figure exists. Both pages use that metro wage with identical time and chemical assumptions, so the ranges match. The cities genuinely differ elsewhere on this page: Fort Worth's sales tax reaches 8.25% through two half-percent districts, Dallas's through a single transit point — and Fort Worth has the county surveillance report below.

How do I check a Fort Worth pest control company's licence?

Ask for its TPCL number, then download the Commercial Business list from the "Structural Pest Control Reports: Current Licenses" page on the Texas Department of Agriculture website. Find the company and check its categories, its licence expiry, its insurance expiry and its named Responsible Certified Applicator. The check is free and takes about five minutes.

Can a company licensed for general pest control treat my termites?

Only if it also holds the Termite and Wood Destroying Insect Control category. Licences are issued per category under Texas rules, and the Pest Control category covers pests that do not normally attack the building itself. Termite estimates and disclosures may only be prepared by applicators or technicians licensed in the termite category.

What paperwork must I get before a termite treatment?

A written estimate with disclosure documents: a diagram of the structure with perimeter measurements and treatment areas, the label of any pesticide to be used, warranty details, the termiticide concentration or minimum bait-station count, the Consumer Information Sheet, and the company's TPCL number — all before treatment begins. A verbal estimate alone is not enough to start work.

What is the SPCS/T-5 form?

The Texas Official Wood Destroying Insect Report — the form the state prescribes for termite inspections connected with a real-estate transaction. No alterations to it are permitted. It reports visible evidence and conducive conditions at inspection time; by its own terms it is not a structural damage report and not a warranty that insects are absent. Texas publishes no set fee for the inspection itself.

Is sales tax charged on pest control in Fort Worth?

Yes. The Texas Comptroller's guidance for this trade states that structural pest control providers must collect sales tax on the total charge, including additional fees, even when no pests are found. Inside Fort Worth city limits the combined rate is 8.25%, and the exact rate follows the service address. Ask whether any quote you receive includes tax.

What does Tarrant County's mosquito surveillance do for me?

Tarrant County Public Health's Vector Control team traps and tests mosquitoes across the county year-round and publishes a Weekly Arbovirus Surveillance Report — the county's own record of West Nile activity. Reading it before you buy mosquito work tells you whether local activity justifies the spend. The county also treats abandoned properties under its abatement powers, but it does not treat private homes or yards — that remains a licensed company's job.

The pests are in my lawn, not my house. Is that the same licence?

No. Pests of trees, shrubs and plantings sit in a separate category, Lawn and Ornamental — and lawn pest work is covered on this site's lawn care pages, not here. A company treating your lawn needs that category, just as a termite company needs the termite category. The category on the licence has to match the job, whichever side of the foundation the job is on.

Areas served in and around Fort Worth

Tell us your neighbourhood when you request a quote, and we will match you with a professional who covers your part of the city.

The list, once verified, describes the Fort Worth area this page covers for matching a homeowner with a professional — a coverage area for this page, not a claim about any one company's service area.

Related pages

Disclaimer. The costs on this page are estimates only, computed from the sources below with their assumptions printed next to them. Your final price depends on your home, the job and the scope you agree, and costs vary by job, material and location. Always confirm a company's licence, its categories and its insurance before work starts.

Sources

  • Texas Department of Agriculture, Structural Pest Control Service — business and applicator licensing; "Structural Pest Control Reports: Current Licenses"; the Official Texas Wood Destroying Insect Report, SPCS/T-5 (texasagriculture.gov)
  • Texas Occupations Code Chapter 1951 — Structural Pest Control Act, §§1951.201, 1951.255, 1951.301 (statutes.capitol.texas.gov)
  • Texas Administrative Code, Title 4 — §7.123 (insurance), §7.124 (licence categories), §7.144 (use records), §7.147 (consumer information sheet), §7.174 (termite disclosures), §7.176 (WDI report form)
  • Texas Comptroller of Public Accounts — Publication 94-114, "Pest Control Services"; combined sales tax rate for an address inside Fort Worth city limits, from the Comptroller's city rate table (comptroller.texas.gov)
  • Tarrant County Public Health, Vector Control — county-wide mosquito and West Nile virus surveillance and the Weekly Arbovirus Surveillance Report (tarrantcountytx.gov)
  • Syngenta — Demand CS Insecticide label, EPA Reg. No. 100-1066 (label rates and perimeter band); retail listings at Pestrong and DoMyOwn, read November 17, 2026
  • U.S. Bureau of Labor Statistics, OEWS May 2025 — Pest Control Workers (SOC 37-2021) wages, Dallas-Fort Worth-Arlington metro and Texas (bls.gov; wage means read via republication of the OEWS file and cross-checked against the U.S. Department of Labor's republications — re-check at QA)
Call for a free quote Get a Quote